1 / 11

SeaPerch

SeaPerch. Design Challenge and Construction Overview. Introduction. The SeaPerch is a simple ROV (remotely operated vehicle) made from PVC pipe, motors, and floats. You will utilize the design process to create an ROV that meets this year’s specific challenge(s).

Download Presentation

SeaPerch

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SeaPerch Design Challenge and Construction Overview

  2. Introduction • The SeaPerch is a simple ROV (remotely operated vehicle) made from PVC pipe, motors, and floats. • You will utilize the design process to create an ROV that meets this year’s specific challenge(s). • You will work in teams to construct and test a working ROV.

  3. The Design Challenge • You will work in pairs for this challenge. • The ROV is expected to: • Be remotely controlled • Be connected to a tether • Submerge in water • Move left and right • Rise to the surface • Each student is responsible for creating his or her own design sketches.

  4. The Design Challenge Each student is expected to: • Create 4 different sketches of your ideas for a structural system (the PVC pipe). • Evaluate your ideas with your partner. • Select a final design idea (standard or modified structure). • Draw your final idea for the structure. • Give reasons for your final choice (in writing).

  5. Design Constraints • 5’ – 8’ of ½” PVC pipe • PVC connectors • 3 motors with props, holders, and containers • 2 floats • Tether wire • Netting with tie wraps • Screws • 1 – 12 volt battery • 1 circuit board • 1 control box • CAT5 wire • Wire • Solder • Electrical Tape • Rubber Tape • Tools Each group will have the following materials:

  6. Design Constraints (2) • The frame is made of ½” PVC pipe • The frame must hold the motors, floats, and weights (as needed) • The motors are positioned on the frame • The motors are expected to submerge the ROV, move it left and right, and raise it to the surface • The ROV is powered by a 12-volt battery and tethered to the control box, which allows the student to maneuver the ROV.

  7. Tools In order to build your SeaPerch ROV, you will use a variety of tools: • Safety glasses • Saw • Screwdriver • Drill • Drill bits • Vise/clamp • Pliers • Ruler • Scissors • Hot plate • Soldering iron

  8. Construction Overview • There are four different steps to the construction of your ROV: • Structural System • Mechanical System • Electrical System • Integration/Quality Control/Testing

  9. Structural System • Design the frame to be made out of ½” PVC pipe. • The frame must hold motors, floats, netting, and weights as needed. • Students may use a standard structure (see picture at left) or develop a modified structure of their own.

  10. Mechanical System • Identify the position and direction for the three motors. • The motors must submerge and raise the ROV, and move it left and right. • The motors must be sealed tightly from the water, using wax.

More Related