1 / 15

More examples

More examples. Today’s examples are related to coursework . In the original program, the relation arrow(X,Y) represents a directed link from X to Y. The relation cango (X,Y) means that there is a path from X to Y cango (X, Y):- arrow(X, Y). cango (X, Y):- arrow(X, Z),

zev
Download Presentation

More examples

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. More examples Today’s examples are related to coursework

  2. In the original program, the relation arrow(X,Y) represents a directed link from X to Y. The relation cango(X,Y) means that there is a path from X to Y cango(X, Y):- arrow(X, Y). cango(X, Y):- arrow(X, Z), cango(Z, Y). Once upon a time, an insect was crawling along a wire cube, …… b a d c e f g h

  3. cango(X, Y):- arrow(X, Y). cango(X, Y):- arrow(X, Z), cango(Z, Y). ?- cango(a,h). a b c e d f d g g f h hhhhh Prolog uses ‘cango’ with a depth first search. ‘cango’ is a general program not just for this given cube. How does ‘cango’ program work? b a d c e f g h Observation: change the order of arrow, then check if the order of solutions changes

  4. In the original program, the relation arrow(X,Y) only represents a link from X to Y, not Y to X. How do we extend it to a bi-directional link? Easy – using disjunction: next(X, Y):- arrow(X, Y). next(X, Y):- arrow(Y, X). Is ‘cango’ really a general program? b a d c e f g h cango(X, Y):- next(X, Y). cango(X, Y):- next(X, Z), cango(Z, Y).

  5. Introduced circles into the map. There is a danger of being trapped in a circle! ?- cango(a,h). a b c e a d b c a a What happens after replacing ‘arrow’ by ‘next’? b a d c e f g h cango(X, Y):- next(X, Y). cango(X, Y):- next(X, Z), cango(Z, Y).

  6. We must add something to avoid being trapped in a circle. Solution 1: using an extra list to store the path generated so far, only extend a new node which is not in the list Solution 2: no u-turn. it is restricted to certain type of maps where circles are only created by u-turn. Q: Is ‘cango’ a general program? A: It only works if no circle in the map. b a d c e f g h Q-block

  7. Solution 2 (we will use this!) • For some maps, there are no circles as long as u-turn is not allowed. In this case, the easy solution is to add an extra test to disallow u-turn. next(a, b, north). next(b, a, south). ...... % PreDir is the direction before X cango(X,Y, PreDir):- next(X,Y, Dir), not_u_turn(PreDir, Dir). cango(X,Y, PreDir):- next(X,Z, Dir), not_u_turn(PreDir, Dir), cango(Z , Y, Dir).

  8. Two ways to define not_u_turn • Define ‘u_turn’, then make use of \+ (not) : u_turn(south,north). u_turn(north,south). u_turn(west,east). u_turn(east, west). not_u_turn(X,Y):- \+( u_turn(X,Y) ). • Define ‘not_u_turn’ directly : not_u_turn(south, west). not_u_turn(south, east). ....... not_u_turn(start, _).

  9. Move to real program, more information needed in the ‘next’ % (From,To, Direction, WhichSide, Distance) next('2q43', '2q49', south, right, 1). next('2q49', '2q43', north, left, 1). next('2q49', 'area3', south, left, 1). next('area3', '2q49', north, left, 1). next('area3', '2q46', south, left, 3). next('2q46', 'area3', north, right, 3). next('2q46', '2q47', south, left, 2). next('2q47', '2q46', north, right, 2). .......

  10. Your ‘cango’ program should have6 parameters cango(X,Y,Path,Dir,Dist,PreDir) Path and Dir are lists which are exactly same as cango4 Dist is a list of distances PreDir indicates previous direction. You need to use it to compare with the next direction. no u-turn ! For example ?- cango(‘2q43’, ‘2q47’, P, Dir, Dist, start). P = [2q43,2q49,area3,2q46,2q47] Dir = [south,south,south,south] Dist = [1,1,3,2]

  11. Put them all together :-[map]. % include the file map.pl test(X, Y):- cango(X, Y, Path, Dir, Dist, start), cal_route(Dir, Dist, NewDir, NewDist), write(NewDir), nl, write(NewDist), nl.

  12. A little help on ‘cal_route’ (week5’s task) • The following program reduces a sequence of same items into to one item reduce([X],[X]). % if only one item % nothing to reduce reduce([X,X|T], R):- reduce( [X|T], R ). reduce([X,Y|T], [X|R]):- X \== Y, reduce( [Y|T], R ). ?- reduce([a,a,b,b,b,c], R). produces R = [a,b,c]

  13. Need an extra list to store the path generated so far: cango(X,Y, CurrentPath):- next(X,Y), \+ member(Y,CurrentPath). cango(X,Y, CurrentPath):- next(X,Z), \+ member(Z,CurrentPath), cango(Z,Y, [Z|CurrentPath]). (‘\+’ means ‘not’) If we want to return a path, then add the 4th argument: cango(X,Y, P, FinalPath):- next(X,Y), \+ member(Y,P). FinalPath = [Y|P]. cango(X,Y, CP, FP):- next(X,Z), \+ member(Z,CP), cango(Z,Y, [Z|CP], FP). Solution 1 - new cango program with circle detection (not used for our assignment !)

  14. When call this new cango, we must initialize the 3rd argument Question: What is the CurrentPath initially? Answer: it is the start point. ?- cango(a,h, [a], Path). Path = [h,d,b,a], … … Why the returned Path is reversed? In each recursion, the 3rd argument is added an element at its front: [a], [b,a], [d,b,a], and finally [h,d,b,a] This kind of list is called an accumulator

  15. Naïve reverse rev1([H|T], R):- rev1(T, RT), append(RT,[H], R). append([], L, L). append([H|T],X,[H|L]):- append(T,X,L). More efficient reverse – the 3rd arg. is an accumulator rev2(L, RL):- % init accumulator rev2(L, RL, []). rev2([H|T], RL, CL):- rev2(T, RL, [H|CL]). rev2([], RL, CL):- % base RL=CL. How to reverse a list another example of using accumulator

More Related