1 / 4

MPLS-TP Next-Hop Ethernet Addressing draft-fbb-mpls-tp-ethernet-addressing-00

IETF 82 November 2011 MPLS. MPLS-TP Next-Hop Ethernet Addressing draft-fbb-mpls-tp-ethernet-addressing-00. Dan Frost danfrost@cisco.com Stewart Bryant stbryant@cisco.com Matthew Bocci matthew.bocci@alcatel-lucent.com.

ardith
Download Presentation

MPLS-TP Next-Hop Ethernet Addressing draft-fbb-mpls-tp-ethernet-addressing-00

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IETF 82 November 2011 MPLS MPLS-TP Next-Hop Ethernet Addressing draft-fbb-mpls-tp-ethernet-addressing-00 Dan Frost danfrost@cisco.com Stewart Bryant stbryant@cisco.com Matthew Bocci matthew.bocci@alcatel-lucent.com

  2. In an MPLS-TP network without IP, how do you determine the Ethernet MAC address of the next hop? • No standard answer to this basic question • Some implementations using broadcast address or relying on static MAC configuration; both have problems • Considerations differ for point-to-point vs. multipoint Ethernet links The Ethernet Addressing Problem

  3. This draft mainly consists of text that was originally part of the MPLS-TP Data Plane Architecture (RFC 5960) and accepted by the WG, but which was taken out for scope reasons • A reserved Ethernet multicast address is allocated and dedicated for MPLS-TP point-to-point links • Use of static addressing and broadcast address still allowed, but multicast address SHOULD be used instead and MUST be supported by default in the receive path • Draft also defines an Ethernet data-set for the G-ACh Advertisement Protocol that enables unicast MAC discovery even without IP Solution

  4. Recommend WG adoption to resolve this open issue and get an early multicast address allocation as MPLS-TP implementations near completion Next Steps 82

More Related