1 / 36

Current Issues & Challenges in the Development of Pharmacopoeial Monographs:

Current Issues & Challenges in the Development of Pharmacopoeial Monographs: Some New Challenges in the Impurities Arena. Dr. Susanne Keitel European Directorate for the Quality of Medicines & HealthCare Hyderabad, 7 September 2009. Structure.

haley-frost
Download Presentation

Current Issues & Challenges in the Development of Pharmacopoeial Monographs:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Current Issues & Challenges in the Development of Pharmacopoeial Monographs: • Some New Challenges in the Impurities Arena Dr. Susanne KeitelEuropean Directorate for the Quality of Medicines & HealthCare Hyderabad, 7 September 2009

  2. Structure • The European Pharmacopoeia: General Monograph “Substances for Pharmaceutical Use” • Specific API Monographs • General chapter “Control of Impurities in Substances for Pharmaceutical Use” • Residual Solvents • Genotoxic Impurities • Mesylates • Heavy Metals

  3. Contents of the European Pharmacopoeia: more than 2200 monographs

  4. Principles of Impurity Control in the European Pharmacopoeia • Reflect regulatory practice in monographs • Application of ICH guideline Q3A to pharmacopoeial substances --> focus on quantitative aspects • Adaptation to globalisation  constant need for updating • Revision of old monographs , in particular progressive replacement of TLC by LC, GC or CZE

  5. Pharmacopoeial Requirements for API Requirement for a substance consists of: Specific monograph + general monograph(s) Whole set of requirements defines quality

  6. General monograph:Substances for Pharmaceutical Use Related substances Unless otherwise prescribed, organic impurities in active substances are to be reported, identified wherever possible, and qualified as indicated in Table 2034.-1. Specific thresholds may be applied for impurities known to be unusually potent or to produce toxic or unexpected pharmacological effects.

  7. Use Maximum daily dose Reporting threshold Identification threshold Qualification threshold Human or human and veterinary ≤ 2 g /day > 0.05 per cent > 0.10 per centor daily intake > 1.0 mg (whichever is the lower) > 0.15 per cent or daily intake > 1.0 mg (whichever is the lower) Human or human and veterinary > 2 g/day > 0.03 per cent > 0.05 per cent > 0.05 percent Veterinary only Not applicable > 0.1 per cent 0.2 per cent > 0.5 per cent Substances for Pharmaceutical Use (2)

  8. Biological and biotechnological products Peptides Oligonucleotides Radiopharmaceuticals Products of fermentation and semi-synthetic products derived therefrom Crude products of animal or plant origin or herbal products *see chapter 5.10 Control of impurities in substances for pharmaceutical use Thresholds Do not Apply for*

  9. Tests in Pharmacopoeial Monographs To detect: organic impurities, inorganic impurities, volatiles Methods: Physical and physico-chemical Chemical Chromatographic

  10. Basis for Monographs SAFETY FIRST! Products of proven safety Products evaluated and approved by competent authorities of Member States Impurity profiles for existing, approved synthetic routes Robust, validated analytical methods based on collaborative laboratory testing

  11. Impurities Section Gives impurities that are known to be detected by monograph tests Usually controlled by related substances test, but may be other tests Not necessarily exhaustive Based on information obtained and verified during elaboration

  12. Monograph Standard Requirements • Limits for: • Specified impurities • Unspecified impurities • Total impurities • Disregard limit • Impurities section (transparency list) • Specified impurities • Other detectable impurities • If the impurities section is not divided, all the impurities cited are specified

  13. Specified Impurities • Specified impurities are those in specifications for approved products • Specifications for approved products and batch analysis data for approved products • Specified impurities are qualified at or above the level indicated in the monograph

  14. Other Detectable Impurities (ODIs) Specific EP category • Impurities sections in monographs may have a list of ODIs • Analytical information only: the impurity isdetected by the monograph method • ODIs are limited in the monograph by the limit for “unspecified impurities” (orSubstances for Pharmaceutical Use )

  15. Transparency List Bromazepam

  16. General Chapter 5.10 • Control of Impurities in Substances for Pharmaceutical Use • Defines: • Basis for the elaboration of monographs with regards to the control of impurities • Terminology • Interpretation of related substances tests • Other aspects of impurities control • ESSENTIAL READING!

  17. Control of Impurities in Substances for Pharmaceutical Use The tests are intended to cover organic and inorganic impurities that are relevant in view of the sources of active substances in authorised medicinal products. Control of residual solvents is provided by the general monograph “Substances for pharmaceutical use” and general chapter 5.4 “Residual solvents”. Instructions for the control of impurities may be included in the Production section of a monograph, for example where the only analytical method appropriate . . . is to be performed by the manuf. since the method is technically too complex for general use . . .

  18. Example: Anhydrous Paroxetine HCl Specified impurities: A, B, C, D, E, F, G, H, I, J

  19. Interpretation of The Related Substances Test A specific monograph on a substance for pharmaceutical use is to be read in conjunction with the general monograph on substances for pharmaceutical use. Where a monograph has no related substances test (or equivalent) but only specific tests, the user of a substance must nevertheless ensure that there is suitable control of organic impurities. Where an impurity other than a specified impurity is found in an active substance, it is the responsibility of the user of the substance to check whether it has to be identified / qualified

  20. Interpretation of Related Substances Test Acceptance criteria for the related substances test presented in different ways in existing monographs. Decision tree given to be used as an aid in the interpretation of the general acceptance criteria and their relation with the Impurities section of the monograph. General acceptance criteria for “other” impurities are currently expressed in various ways in the monographs: “any other impurity”, “other impurities”, “any impurity”, “any spot”, “any band”, etc. Pending editorial adaptation of already published monographs, the decision tree may be used to determine the acceptance criteria to be applied.

  21. Revision Needs • Replace TLC by LC, GC or CZE • Add a limit for total of impurities • Allow unambiguous peak identification • Bring general acceptance criterion in line with “Substances for pharmaceutical use“ • Introduce impurity section (transparency list)

  22. Directive 2003/63/EC “However, where a starting material in the European Pharmacopoeia … has been prepared by a method liable to leave impurities not controlled in the pharmacopoeia monograph, these impurities and their maximum tolerance limits must be declared and a suitable test procedure must be described.”

  23. Monograph Revision Impurities control has to be updated for newly authorised products/sources: “[Where] a monograph … [may] be insufficient … the competent authorities shall inform the European Pharmacopoeia. The marketing authorisation holder shall provide the European Pharmacopoeia with the details of the alleged insufficiency and the additional specifications applied.” (Directive 2003/63/EC)

  24. Residual Solvents Dealt with in Substances for Pharmaceutical Use and general chapter 5.4 Residual solvents Specific monographs do not include a test for residual solvents, except:

  25. Residual Solvents: Class 1 solvents are always named and limited in monographs Class 3 solvents are only named and limited in monographs when they exceed 0.5% (impact on assay results) Class 2 solvents are NOT named and limited in monographs: chapter 5.4 applies

  26. Genotoxic Impurities CHMP Guideline on the limits of genotoxic impurities in effect 1.1. 2007 Applicable to New active substances New applications for existing active substances where assessment of the route of synthesis, process control and impurity profile does not provide reasonable assurance that no new or higher levels of genotoxic impurities are introduced as compared to products currently authorised in EU containing the same active substance.

  27. Challenges for the Pharmacopoeia What about existing substances covered by an EP monographs ? Transparency lists may contain structures of potentially genotoxic substances Structural alert does not automatically imply genotoxicity Sometimes production section to flag up PGIs

  28. PGIs in Transparency Statements (1) Classified as « other detectable impurities » This is analytical information only This does not necessarily confirm the occurrence of the impurity at relevant levels Rarely adequate control of such substances EP monographs may relate to several routes of synthesis The PGI may be irrelevant for certain routes of synthesis

  29. PGIs in Transparency Statements (2) In many cases, introduction of regular testing would not be helpful Analytical challenge: sensitivity, specificity Problem for authors of monograph revisions, new monographs and users

  30. Solution Policy paper on GTI adopted by European Pharmacopoeia Commission in March 2008 EMEA QWP and SWP have been consulted Comments were approved by CHMP and CVMP

  31. Products Authorised Before Issuance of the Guideline Monograph based on approved specifcations Structural alert only does not trigger follow-up Action for monographs only needed when study data demonstrate genotoxicity of the PGI New synthetic routes giving rise to new PGIs or higher levels of previously recognised PGIs => apply Guideline

  32. Products Authorised After Issuance of The Guideline Monographs will be based on specifications of the Marketing Authorisations

  33. Consequences Monographs (limit and tests) will be updated if relevant information is submitted from stakeholders (in particular National Competent Authorities) The existence/use of a monograph does not release the user from his responsibility to review the synthetic route, the process control and the impurity profile as regards PGIs Certification Unit applies the Guideline

  34. Update on Mesilates Working party has been created to work on methanesulfonic and benzenesulfonic acid Possible introduction of tests and limits for lower alkylesters Work on alkylesters of the mentioned acids in mesilate and besilate monographs Currently covered by production sections Await action by regulatory authorities Development of general methods may be considered at a later stage

  35. Heavy Metals – State of Play • Lack of sensitivity of general test • Positive results rarely reported • Ph.Eur. Commission recognises the need for a review • Working party will be appointed in 2009 • Important factors to be addressed: • Class/ source/ origin of the material • Focus on metals which are likely to be present • Focus on priority metals (toxicity, quality) • Allow flexibility in analytical methods • Consider general method approach similar to residual solvents

  36. Thank you!

More Related