1 / 20

ARTIFICIAL WETLAND MODELLING FOR PESTICIDES FATE AND TRANSPORT

ARTIFICIAL WETLAND MODELLING FOR PESTICIDES FATE AND TRANSPORT USING A 2D MIXED HYBRID FINITE ELEMENT APPROXIMATION Part 2/2. Wanko, A., Tapia, G., Mosé, R., Gregoire, C. Processes. Model. Transport :. Tanks (series or parallel) / Convection-dispersion. PESTICIDES DYNAMICS MODELING.

maia
Download Presentation

ARTIFICIAL WETLAND MODELLING FOR PESTICIDES FATE AND TRANSPORT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ARTIFICIAL WETLAND MODELLING FOR PESTICIDES FATE AND TRANSPORT USING A 2D MIXED HYBRID FINITE ELEMENT APPROXIMATION Part 2/2 Wanko, A., Tapia, G., Mosé, R., Gregoire, C Wetland Pollutant Dynamics and Control

  2. Wetland Pollutant Dynamics and Control

  3. Processes Model Transport : Tanks (series or parallel) / Convection-dispersion PESTICIDES DYNAMICS MODELING Flow : Mass Balance Concept / Richards Equation Adsorption : Freundlich isotherm / linear distribution Kinetics : Zero order, first order, Michaelis – Menten. Wetland Pollutant Dynamics and Control

  4. 2D Discretization : Triangular meshs RT0 Mixte Hybrid Finite Element (MHFE) Numerical method : -Particularly well adapted to the simulation of heterogeneous flow field - The unknown parameters have the same order approximation PESTICIDES DYNAMICS MODELING Unknown parameters : • Pressure head and solute concentrations (edges, mesh center) • Water and transport fluxes through the edges Wetland Pollutant Dynamics and Control

  5. Advection dominant problem : Pe (Peclet number) = Numerical oscillations - Vx ,Vz the pore water velocity in x and z directions, respectively (LT-1 ), - x, z the grid spacing in the x and z direction, respectively (L), - Dxx, Dzz, Dxz the dispersion coefficients (L2 T-1). OSCILLATION CONTROL FOR ADVECTION DOMINANT PROBLEM - FLUX LIMITER In the literature this problem is solve by using : Operator Spliting Technique (OST) + a slope limiting tool (Ackereret al.,1999 ; Siegel et al., 1997 ; Oltean., 2001;Hoteit et al., 2002 ; Hoteit et al., 2004 ) Wetland Pollutant Dynamics and Control

  6. Advection dominant problem : Water fluxes The weight of advection is decreased The weight of advection is increased OSCILLATION CONTROL FOR ADVECTION DOMINANT PROBLEM - FLUX LIMITER A new approche including a flux limiter • Transport fluxes (the previous formulation) • Transport fluxes (the new formulation) [0 ; 1] Wetland Pollutant Dynamics and Control

  7. qr Condition qs Hydrodynamics Ks (cm/d) a (cm-1) Transport n he (cm) Initial 0.1060 0.4686 13.1 0.0104 1.3954 0 Glendale clay loam soil parameter (Kirkland et al., 1992) Boundary Initial and Boundary Conditions One-dimensional Transport verification – The flux limiter Wetland Pollutant Dynamics and Control

  8. a) max Pe=1.02 b) max Pe=1.02x103 One-dimensional Transport - Flux limiter effect for different Peclet number Wetland Pollutant Dynamics and Control

  9. b) max Pe=1.02x107 One-dimensional Transport - Flux limiter effect for different Peclet number Sensitivity analysis of the  parameter a) max Pe = 10.2 b) max Pe=1.02x103 c) max Pe=1.02x106 Wetland Pollutant Dynamics and Control

  10. Case Vx (m d-1) Vy (m d-1) aL (m2 d-1) aT (m2 d-1) Pe 1 1.0 0.0 1.0 0.1 0.91 2 1.0 0.0 0.1 0.01 7.14 3 1.0 0.0 1x10-5 1x10-6 7.14x104 Two-dimensional Transport - Flux limiter effect for different Peclet number Parameters used in various cases Two dimensional convection-dispersion problem (left) and regular mesh (right) Wetland Pollutant Dynamics and Control

  11. a) MHFE numerical solution Vx (m d-1) Vy (m d-1) aL (m2 d-1) aT (m2 d-1) b) analytical solution Δx (m) Δy (m) Pe 1.0 0.0 1.0 0.1 1.0 1.0 0.91 X Y Two-dimensional Transport - Flux limiter effect for different Peclet number Case 1 : parameters used Wetland Pollutant Dynamics and Control

  12. Vx (m d-1) Vy (m d-1) aL (m2 d-1) aT (m2 d-1) Δx (m) Δy (m) Pe 1.0 0.0 0.1 0.01 0.5 1.0 7.14 X Y Two-dimensional Transport - Flux limiter effect for different Peclet number Case 2 : parameters used a) MHFE without flux limitingb) MHFE with flux limiting, h = 1c) Analytical solution Iso-concentration lines: second test case Wetland Pollutant Dynamics and Control

  13. Vx (m d-1) Vy (m d-1) aL (m2 d-1) aT (m2 d-1) Δx (m) Δy (m) Pe 1.0 0.0 0.1 0.01 0.5 1.0 7.14 X Y Two-dimensional Transport - Flux limiter effect for different Peclet number Case 3 : parameters used a) MHFE without flux limitingb) MHFE with flux limiting, h = 1c) Analytical solution Iso-concentration lines: second third case Wetland Pollutant Dynamics and Control

  14. : the isotherm linear adsorption coefficient CK is solution concentration of the triangular element K [ML-3], SK is absorbed concentration of the triangular element K [ML-3]. Adsorption model - Verification C(z = 0, t > 0) = 1.0 mg/l C(z , t = 0) = 0.1 mg/l Test case : Kd = 2.38 l/kg (Atrazine ; Vryzas et al., 2007 ) Time (day) Wetland Pollutant Dynamics and Control

  15. C(t = 0, z), the initial concentration, k2 , the dissipation rate, • Zero order k1, the first order rate constant the maximum reaction rate, • First order Km the Michaelis constant X0 the amount of substrate to produce the initial population density • Michaelis – Menten Kinetic models - Verification Simple kinetic models Conditions Wetland Pollutant Dynamics and Control

  16. Kinetic models Initial concentration Kenitic parameters Without kinetic -- Michaelis – Menten Ordre zéro 1er ordre Kinetic models – Verification Initial conditions and kinetic parameters of the tested cases Zero order first orderMichaelis - Menten Wetland Pollutant Dynamics and Control

  17. Depth : 1.5mØ : 3m tank pipe - Sediments («80µ), 30 cm depth, Depth : 2.55mØ : 1m Top layer lysimeter • 12 storage/collector tanks - Fine gravel (4/8), 25 cm depth, - Coarse gravel (10/14), 25 cm depth, Top view Bottom layer Lysimeters : Construction and instrumentation - Model Validation Aim: to elaborate a pilot-constructed wetland design based on bioaugmentation-phytoremediation coupling in order to study and improve the biological potentialities concerning the pesticides remediation CONCEPTION AND DIMENSIONS OF THE PILOT-PLANT • The pilot-plant consists of 12 lysimeters • The filtrating media Phragmites australis, Typha latifolia, Scirpus lacustris • 9 planted bed Wetland Pollutant Dynamics and Control

  18. MATERIAL -12 Lysimeters -flexible feeding pipe -12 collector tanks INPUT -water + pollutant (glyphosate, diuron, copper) Lysimeters : Construction and instrumentation - Model Validation ANALYSES Tests on influents and effluents will be made at different depths Tests on sediments Top view Cross view Wetland Pollutant Dynamics and Control

  19. Lysimeters : Construction and instrumentation - Model Validation ANALYSES Tests on influents and effluents will be made at different depths Tests on sediments Wetland Pollutant Dynamics and Control

  20. Wetland Pollutant Dynamics and Control

More Related