1 / 9

Virtualization Infrastructure Administration

Virtualization Infrastructure Administration. Hyper-V 2012 R2 Jakub Yaghob. Building our own (virtualized) infrastructure – Hyper-V. port: 112 x. internet. GW: 10.2.0.1 Mask: 255.255.0.0 DNS1: 195.113.19.71 DNS2: 195.113.19.77. acheron. 10.250. x .249. 10.2.2. x. HVSCM x. HVAD x.

santa
Download Presentation

Virtualization Infrastructure Administration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Virtualization Infrastructure Administration Hyper-V 2012 R2 Jakub Yaghob

  2. Building our own (virtualized) infrastructure – Hyper-V port: 112x internet GW: 10.2.0.1 Mask: 255.255.0.0DNS1: 195.113.19.71DNS2: 195.113.19.77 acheron 10.250.x.249 10.2.2.x HVSCMx HVADx 10.252.x.y 10.250.x.250 10.250.x.1 10.250.x.2 10.250.x.3 HVx1 HVx2 HVx3 10.251.x.1 10.251.x.2 10.251.x.3 10.251.0.1 virtsan

  3. W2012R2 installation for AD • Deploy template HVAD • VM name HVADx • Start HVADx • Install W2012R2 (std+GUI) • Install VMware tools (Guest->Install …) • Typical • Restart • Setup the network cards • Network “Kralicekazurit” has IP 10.2.2.x, Mask 255.255.0.0, GW 10.2.0.1, DNS1 195.113.19.71, DNS2 195.113.19.77 • Network “Virt mgmt” has IP 10.250.x.250, Mask 255.255.255.0 • Use MAC for network detection • Enable remote access • Access from anywhere using RDP to acheron.ms.mff.cuni.cz:112xx (e.g. 11203) • Make updates

  4. W2012R2 installation • Add role “Active Directory Domain Services” • Installs DNS server • Promote server to the domain controller • Create a new forest • All DNS for all NICs will be set to 127.0.0.1 • DNS server must forward foreign queries to the original DNS (195.113.19.71, 195.113.19.77) • Check internet connectivity • Add features “Failover clustering”, “Hyper-V management tools” • Add role “Remote Access” • Configure router for NAT from 10.250.x.0 to 10.2.2.x • Update Hyper-V core servers

  5. Hyper-V core server installation • Deploy template HVcore • VM name HVxy • Start HVxy • Install Hyper-V • Install VMware Tools • D:\setup64 • Set computer name to HVxy • Configure all NICs • “Network settings” • Use “ipconfig /all” for detecting MAC/IP pairs • All NICs have static IP • “Virt mgmt” - 10.250.x.y, mask 255.255.255.0, GW 10.250.x.250, DNS 10.250.x.250 • “Virt SAN” - 10.251.x.y, mask 255.255.0.0 • “Virtvmotion” - 10.252.x.y, mask 255.255.255.0 • Join the domain • Set the time zone • Configure iSCSI • Run “iscsicpl” • “Discovery” ->”Discover portal” -> 10.251.0.1 • “Targets” -> “Connect” (add to favorite targets) • “Volumes and devices” -> “Auto Configure”

  6. Failover cluster • Running on HVADx • Add HVxy servers • Add feature “Failover clustering” to all HVxy • Set iSCSI disks for HVxy • Select HVx1, bring online only the small (2GB) disk, initialize (remove VMware GPT), format (no letter assigned) • Bring online the small disk on all other HVxy • Failover cluster manager • “Validate configuration” • Add HVxy servers • Go through validation • Create cluster • The small disk should be marked as “Witness in Quorum” • Creates another virtual network card, IP 10.250.x.100 • Bring online the big iSCSI disk on all HVxy • Add disk in failover cluster manager • Mark the big disk as “Cluster shared volume”

  7. Hyper-V manager • Running on HVADx • Configure Hyper-V for each node HVxy • Enable “Live migration” • Add incoming live migrations IP 10.252.x.y, mask 255.255.255.0 • Create virtual switches • Failover cluster manager • “Roles” -> “Virtual machines” -> “New VM” • Set VM location to the clustered big volume • Set remaining VM attributes • Manage clustered VM from “Failover cluster manager” of from “Hyper-V manager”

  8. Hyper-V system center manager – preinstall • Deploy template HVSCM • VM name HVSCMx • Start HVSCMx • Install W2012R2 • Install VMware tools (Guest->Install …) • Setup the network cards • Network “Virt mgmt” has IP 10.250.x.249, Mask 255.255.255.0, GW 10.250.x.250, DNS 10.250.x.250 • Update windows • Add the server to the domain • Login as domain admin • Download and install Windows Assessment and Deployment Kit • http://go.microsoft.com/fwlink/?LinkID=302319 • Only “Deployment tools” and “Windows PE” required • Install SQL Server 2012 • [virtlab-large-storage] ISO/virt/HyperV/SQLServer2012SP1-FullSlipstream-ENU-x64.iso

  9. Hyper-V system center manager – base install • Create new administrative users in domain • scm-admin • scm-adder • Set scm-admin account as local administrator for HVSCMx • Set both accounts as local administrators for HVxy • Restart HVxy • Create a new container for distributed key management in domain • Use ADSI Edit • VMMDKM, full access for scm-admin, scm-adder • Mount DVD with SCM • [virtlab-large-storage] ISO/virt/HyperV/mu_system_center_2012_r2_virtual_machine_manager_x86_and_x64_dvd_2913737.iso • Install SCM VMM • Use scm-admin as a “Run As” service user • Use VMMDKM as distributed keys container • CN=VMMDKM,DC=dom2,DC=dom1 • Run the VMM console • Add Hyper-V hosts • Use cluster IP/name • Use scm-adder as a “Run As” user

More Related