1 / 22

STT-RAM Circuit Design

STT-RAM Circuit Design. Max I WRITE (Recap), MTJ Sharing Paper. Cell Sizing. Max I WRITE for I-STT (IBM65). I-STT MTJ Specs (Jianping). For 1ns switching: R P ≈ 500 Ω TMR ≈ 120% AP→P: 380-460 μ A P→AP: 600-800 μ A I WRITE(P→AP) /I WRITE(AP→P) : 1.5-2 I READ,MAX :

ull
Download Presentation

STT-RAM Circuit Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. STT-RAM Circuit Design Max IWRITE (Recap), MTJ Sharing Paper

  2. Cell Sizing Max IWRITE for I-STT (IBM65)

  3. I-STT MTJ Specs (Jianping) • For 1ns switching: • RP ≈ 500Ω • TMR ≈ 120% • AP→P: 380-460μA • P→AP: 600-800μA • IWRITE(P→AP)/IWRITE(AP→P): 1.5-2 • IREAD,MAX: • If both the read and write pulses are on the order of a few ns, then IREAD/IWRITE ≈ 2/3. • We can share access transistors! (MAYBE) • Limiting factor in MTJ sharing is TMR degradation

  4. Minimum Cell Size (NN Corner) • VBS = -0.25V • Nominal • 37–45.5F2 • LVT • 33–40F2 • VBS = 0.00V • Nominal • 36–44F2 • LVT • 32.5–39.5F2

  5. Maximum Write Currents • 2 Cases: • VDD = 1V, WL = 1V • Nominal voltages specified in documentation • VDD & VWL is boosted (while keeping VDS, VGS < 1V) • Different VBL & VSL used to write “1” & “0” • IWRITE(P→AP)/IWRITE(AP→P): 1.5-2 • Example: • VWL = 1.10V • VBL<1> = 0.00V • VSL<1> = 1.10V • VBL<2> = 0.10V • VSL<2> = 1.40V • IWRITE: • AP→P = 335μA • P→AP = 670μA RP SL<1> BL<2> IWRITE (AP→P) IWRITE (P→AP) RAP WL<N> WL<N> BL<1> SL<2>

  6. Simulation Results (P→AP) • MTJ Specs: • RP = 500Ω • TMR = 120% IWRITE (P->AP) [μA] • NOMINAL VT • 25F2: VWL = 1.00V, VSL = 0.00V, VBL = 1.20V • 35F2: VWL = 1.10V, VSL = 0.10V, VBL = 1.35V • 50F2: VWL = 1.25V, VSL = 0.25V, VBL = 1.65V • LOW VT • 25F2: VWL = 1.00V, VSL = 0.00V, VBL = 1.20V • 35F2: VWL = 1.10V, VSL = 0.10V, VBL = 1.40V • 50F2: VWL = 1.30V, VSL = 0.30V, VBL = 1.80V

  7. Simulation Results (AP→P) • MTJ Specs: • RP = 500Ω • TMR = 120% IWRITE (AP->P) [μA] • NOMINAL VT • 25F2: VWL = 1.00V, VSL = 1.00V, VBL = 0.00V • 35F2: VWL = 1.10V, VSL = 1.10V, VBL = 0.00V • 50F2: VWL = 1.25V, VSL = 1.25V, VBL = 0.00V • LOW VT • 25F2: VWL = 1.00V, VSL = 1.00V, VBL = 0.00V • 35F2: VWL = 1.10V, VSL = 1.10V, VBL = 0.00V • 50F2: VWL = 1.30V, VSL = 1.30V, VBL = 0.00V

  8. Summary • Maximum IWRITE (LVT, FF) (P→AP) : • 25F2: 453.3μA • 35F2: 748.8μA • 50F2: 1183μA • Maximum IWRITE (LVT, FF) (AP→P) : • 25F2: 243.2μA • 35F2: 358.9μA • 50F2: 545.2μA • 35F2 LVT cell almost meets I-STT specs for 1ns switching • AP→P current a little weak (can be adjusted a little higher) • 38-40F2 LVT cell w/ boosted voltages can safely meet Jianping’s spec for 1ns switching

  9. MTJ Sharing TMR Degradation (Reading)

  10. TMR Degradation SL BL<M> BL<2> BL<1> Parallel Resistance (R||) degrades TMR WL<2> WL<N> WL<1> Parasitic Parallel Resistance MTJ1,1 MTJ1,2 MTJ1,M MTJN,M MTJ2,1 MTJ2,2 MTJ2,M MTJN,2 MTJN,1

  11. Effective RP and RAP • Worst case TMR’: largest RP’ and smallest RAP’ • Largest RP’: • Smallest RAP’

  12. Effective TMR (1) • Putting it all together: Example 1kbit Arrays: • TMR = 120%, M = 2, N = 16, 32-bit words: TMR’ = 4.8% • TMR = 120%, M = 2, N = 8, 64-bit words: TMR’ = 9.8% • TMR = 120%, M = 2, N = 4, 128-bit words: TMR’ = 20.7%

  13. TMR’ vs. N for 1T-2MTJ (M = 2)

  14. TMR’ vs. N for 1T-3MTJ (M = 3)

  15. Monte Carlo Simulations (1) • Limited to M = 2 • Theoretical TMR’ is overly pessimistic • With error correction we can let the extreme cases fail. • Example: • Bit read error = 0.1% • Word length = 64 • # error correcting bits = 4 • Probability of a word error: 1 in 137,763,712 reads • M = 2, N = 4 • TMR = 120%, RP = 500Ω • 25k Simulations • Worst Case TMR’ • Theoretical = 20.7% • Simulation = 46.2%

  16. Monte Carlo Simulations (2) • M = 2, N = 8 • TMR = 120%, RP = 500Ω • 25k Simulations • Worst Case TMR’ • Theoretical = 9.8% • Simulation = 20.7% • M = 2, N = 16 • TMR = 120%, RP = 500Ω • 25k Simulations • Worst Case TMR’ • Theoretical = 4.8% • Simulation = 10.1%

  17. MTJ Sharing Device IREAD/IWRITE Requirements (Writing)

  18. Defining IREAD,MAX & IWRITE,MIN • IREAD,MAX: The maximum read current such that the probability of flipping the MTJ is less than some ε(i.e. ε = 0.1% → IREAD,MAX = 200μA) • IWRITE,MIN: The minimum write current such that the probability of failing to flip the MTJ is less than some ξ(i.e. ξ = 0.1% → IWRITE,MIN = 600μA)

  19. IREAD/IWRITE for 1T-2MTJ (1) BL<1> • Limited to 1T-2MTJ architecture WL<2> WL<1> BL<2> IWRITE,MIN α∙IREAD,MAX

  20. IREAD/IWRITE for 1T-2MTJ (2) RP Case 1: RAP Case 1: RP Case 2: RAP Case 2: “1” “1” “1” “1” “0” “0” “0” “0” RAP RP RAP RP RP RP RP RAP RP RAP RP RAP RP RP RAP RP

  21. IREAD/IWRITE vs. TMR

  22. SUMMARY • Cell Sizing: 35-40F2 • TMR Degradation: M = 2 (READING) • Word length should be greater than 64 • Serious TMR degradation for N > 8 • Ideally: • RP = 500Ω, TMR = 120% • M = 2, N = 4 → 1kbit arrays of 128-bit words • TMR’ = 20.7% • Reality: TMR’ ≈ 45% (ignoring worst case) • Need less than 8 error correcting bits • IREAD/IWRITE (WRITING) • For TMR = 120%, χ = 1.5-2: IREAD/IWRITE > 0.36-0.43

More Related