1 / 9

VLAN Trunking Protocol

VLAN Trunking Protocol. Trunking VTP Inter-VLAN Routing. What is VLAN Trunking?. A physical and logical connection between two switches The trunk can carry the traffic of multiple VLANs Mechanism must be provided to identify VLAN membership on the trunk link Tagging (802.1q)

vachel
Download Presentation

VLAN Trunking Protocol

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. VLAN Trunking Protocol Trunking VTP Inter-VLAN Routing

  2. What is VLAN Trunking? • A physical and logical connection between two switches • The trunk can carry the traffic of multiple VLANs • Mechanism must be provided to identify VLAN membership on the trunk link • Tagging (802.1q) • Encapsulation (ISL)

  3. 802.1q Frame Tagging • VLAN identifier inserted into layer 2 frame

  4. ISL Encapsulation • Ethernet frame is encapsulated with ISL header and modified FCS • Results in non-standard frame size • Not-interoperable with non-Cisco equipment

  5. IOS Trunk Commands 1 Configuring trunk Links Switch(config-if)#switchport mode trunk Switch(config-if)#switchport trunk encapsulation dot1q OR Switch(config-if)#switchport mode trunk Switch(config-if)#switchport trunk encapsulation isl 2 Verifying trunk links Switch#show trunk

  6. VTP Overview • Protocol to ensure that switches under common administrative control have consistent VLAN configuration & reduces complexity • VTP messages encapsulated in ISL or dot1q frames • Switches have 3 VTP modes • Server – add, modify, delete VLANs • Client – process VLAN changes and forward VTP messages • Transparent – forward VTP messages only

  7. Types of VTP messages • Advertisement requests • Request from client switches for VLAN information • Summary Advertisements • VTP servers issue summary advertisements every 5 minutes with revision number • Clients which receive a summary advertisement with higher revision number than current create advertisement request • Subset advertisements • Information from server about VLAN configuration

  8. Inter-VLAN routing • Each VLAN in separate layer 3 broadcast domain • Router needed to switch packets between VLANs

  9. Using sub-interfaces • If you have 3 VLANs but only 1 router port • Create a trunk port on the switch • Connect to router port • Configure sub-interfaces on the router • Does not work on 10Mbps interfaces

More Related