1 / 9

Differential Preamp

Differential Preamp. Stephen Kaye 2013-3-22. New Preamp Design Motivation. Move preamplifier from controller to the Vacuum Interface Board (VIB) Amplifies signal near the CCDs Larger signal less susceptible to noise during transmission

afric
Download Presentation

Differential Preamp

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Differential Preamp Stephen Kaye 2013-3-22

  2. New Preamp Design Motivation • Move preamplifier from controller to the Vacuum Interface Board (VIB) • Amplifies signal near the CCDs • Larger signal less susceptible to noise during transmission • Use dummy CCD output to create differential transmission • Decrease susceptibility to noise and crosstalk by creating and transmitting a differential signal

  3. Preamp Design AC Coupled Differential Input from CCD DC Black Level Clamp

  4. Preamp Design (Generic)

  5. Preamp Design - Gain • Image area full well is 275,000e- (Adjust clocks not to exceed this.) • 16 bit ADC differential input voltage range is +- 4.096V (AD7625) • Map this to 60,000 ADU, so conversion gain = 4.6e-/ADU • CCD sensitivity = 7 µV/e- • Total video gain = 1.95 V/V • All video gain is in preamp stage

  6. Preamp Design – Black Level Clamp • Switch connects AC coupling capacitors to ground • Switch activated during vertical transfers • Transients from switch are coupled to both inputs and are common mode

  7. Preamp Design - Noise

  8. Preamp Design - Noise

  9. Preamp Design – Output Impedance • Preamp is driving twinax cables • Twinax cable impedance is 100 Ω • Series resistors are 100 Ω for serial termination

More Related