1 / 16

Antenna Booster

Antenna Booster. What is antenna booster?. A device used to amplify the signal received (by ratio) by the antenna before feeding to the television receiver. A signal protection box that regulates television frequency signal. Booster Block Diagram. Antenna input. Lo Detector. Re-transmit.

arista
Download Presentation

Antenna Booster

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Antenna Booster

  2. What is antenna booster? • A device used to amplify the signal received (by ratio) by the antenna before feeding to the television receiver. • A signal protection box that regulates television frequency signal.

  3. Booster Block Diagram Antenna input Lo Detector Re-transmit Signal Detector Duplexer Directional coupler Receiver Input

  4. Detecting Receivers • Allow secondary users in licensed bands if they can guarantee that they do not interfere with primary receivers. Ch. 3,4,5,6,7 Ch.5 Ch.9 Ch.3 shadower Ch.5 Ch.4 Ch.7 Ch.6

  5. Detecting “Passive” Receivers • Legacy receivers must be able to function interference free. • All RF receivers leak local oscillator out of antenna. • Solution: Low cost sensors to detect leakage. Reverse LO leakage

  6. TV Detector Vans • Used since 1920s

  7. Cognisensor • Optimal to connect sensor directly between receiver and antenna. • Increases LO power coupled to sensor, reduces interference. • Allows sensor to reuse receive antenna for transmission. Cognisensor, close up Antenna input CR Duplexer cognisensor Transmitter Directional Coupler LO Detector Receiver Input

  8. TV Booster Sample diagram

  9. ANATOMY OF AN ANALOG TV SIGNAL example; channel 19 Lower Edge – 500.000 MHz Upper Edge – 506.000 MHz 0 amplitude Video Carrier center freq – 501.250 MHz Color Carrier center freq – 504.830 MHz Audio Carrier center freq – 505.750 MHz

  10. ANATOMY OF A DIGITAL TV SIGNAL example; channel 19 Lower Edge – 500.000 MHz Upper Edge – 506.000 MHz 0 amplitude Video, Color and Audio Carrier Signals Are Scattered Throughout the Bandwidth at FULL Amplitude

  11. Equal Frequency allocation of UHF TV in the UHF SPECTRUM

  12. TV Booster Common Problems • No power • Intermittent signal • Light bars rolling up or down • Foggy pictures • Weak signal • Pictures color on and off • Sagging pictures

More Related