1 / 43

Energy Source Diversification

Energy Source Diversification. Patrick Chapman Asst. Professor UIUC Sponsored by: National Science Foundation. What is a diversified energy source?. > 1 energy source Power flow both to and from some sources “Source” may be energy storage

burchette
Download Presentation

Energy Source Diversification

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Energy Source Diversification Patrick Chapman Asst. Professor UIUC Sponsored by: National Science Foundation Grainger Center for Electric Machinery and Electromechanics

  2. What is a diversified energy source? • > 1 energy source • Power flow both to and from some sources • “Source” may be energy storage • Overall ability of multiple sources exceeds the ability of one alone • reliability • environmental responsibility • adaptability • interchangeability Grainger Center for Electric Machinery and Electromechanics

  3. Motivation • Incorporate more ‘preferred’ energy sources • wind • solar • fuel cell • Conversion methods that adapt to various sources and loads • address wide market with single product • Take advantage of deregulation laws Grainger Center for Electric Machinery and Electromechanics

  4. Research Areas • Circuit topologies • Energy source allocation (static control) • Dynamic control • Simulation • Experimentation Grainger Center for Electric Machinery and Electromechanics

  5. Conceptual Diagram • Source-to-load conversions • Source-to-source conversions • Load-to-source conversions Grainger Center for Electric Machinery and Electromechanics

  6. Selected Applications • Classic two-input: Uninterruptable Power Supply Grainger Center for Electric Machinery and Electromechanics

  7. Solar/Battery • Provide average AC power from solar only Grainger Center for Electric Machinery and Electromechanics

  8. Solar/Battery; Flexible Bus Voltage • Allows more flexibility in battery management Grainger Center for Electric Machinery and Electromechanics

  9. Fuel Cell / Battery • Provides dynamic capability to fuel cell system Grainger Center for Electric Machinery and Electromechanics

  10. Three-Source Systems • AC Line, Fuel Cell, Battery • (plus capacitor) Grainger Center for Electric Machinery and Electromechanics

  11. Multiplicity of Same Source • Unbalanced sources, alternative locations Grainger Center for Electric Machinery and Electromechanics

  12. Restricted Switch Types • More general switch schematic symbols • Forward-conducting, bidirectional-blocking (FCBB): • GTO, some cases SCR, MOSFET-diode, IGBT-diode, MCT,RB-IGBT (new) Grainger Center for Electric Machinery and Electromechanics

  13. Circuit Topologies • Straightforward approaches • “n” sources, “n” converters (or similar) • dc link • ac link • New topologies • “n” sources, “1” converter (with “n” inputs) • embed sources in the converter Grainger Center for Electric Machinery and Electromechanics

  14. Standard DC Link • Essentially rectifier-inverter circuit • only we attach different sources and loads Grainger Center for Electric Machinery and Electromechanics

  15. DC Link with ‘Phase Leg’ Approach • Model after standard bridge inverters, active rectifiers • requires inductive load/source impedance (not shown) Grainger Center for Electric Machinery and Electromechanics

  16. AC Link • Use transformer, coupled inductors • isolation possible • less scalable Grainger Center for Electric Machinery and Electromechanics

  17. Prior Work • First ‘multiple-input’ converter from Matsuo, et al, c. 1990 • ‘Multiple input’ can be interpreted more broadly • e.g. three-phase rectifier has three inputs • Here, consider the narrow interpretation • three inputs could handle three different sources (but doesn’t have to) Grainger Center for Electric Machinery and Electromechanics

  18. Matsuo’s Circuit • An AC link topology • Used in • solar/battery • wind/solar/utility • Shown experimentally • Dynamic Analysis Grainger Center for Electric Machinery and Electromechanics

  19. Caricchi’s circuit • Caricchi, et al, developed DC link version, c. 2001 • Shown in • hybrid automobile • wind/solar/utility • Can be used with fewer switches • depends on directionality of sources, loads • Boost only from source to cap. • Buck only from cap. to load Grainger Center for Electric Machinery and Electromechanics

  20. DC Link Circuit • Uses one inductor for each load, source • or requires load, source to have inductive series impedance • Essentially the standard phase legs we know well, applied to multi-source • Uses capacitive energy storage • could be battery instead, but high voltage Grainger Center for Electric Machinery and Electromechanics

  21. Buck-Derived Two-Input • Ordinary buck topology • diode cathode goes to a second source, not ground • Sebastian, et al, showed high efficiency attainable • diversification not studied. Grainger Center for Electric Machinery and Electromechanics

  22. Multiple-Input Buck • Standard buck with parallel inputs • Originally shown by Rodriguez, et al, with only two inputs • shown with solar/battery Grainger Center for Electric Machinery and Electromechanics

  23. New, Recent Work at UIUC • Multiple-input buck-boost (MIBB) Grainger Center for Electric Machinery and Electromechanics

  24. MIBB Characteristics • Buck and boost operation • Similar, but simpler, than Matsuo’s approach • Scalable to n inputs • Can regulate output voltage with an prescribed power flow from each input (in theory) • Probably has some niche in energy source diversification field • In base form, only accommodates unidirectional source/load • can modify a bit to get bidirectional Grainger Center for Electric Machinery and Electromechanics

  25. Cousins of the MIBB • Multiple-input flyback • add isolation, turns ratio Grainger Center for Electric Machinery and Electromechanics

  26. Multiple-Input, Multiple-Output • Flyback with multiple, isolated outputs Grainger Center for Electric Machinery and Electromechanics

  27. Multiple Output, Some Isolated Grainger Center for Electric Machinery and Electromechanics

  28. With a bidirectional load/source • Battery load/source concept Grainger Center for Electric Machinery and Electromechanics

  29. MIBB with Multiplicity of Sources • Battery balancer • (other, probably better balancers exist…) Grainger Center for Electric Machinery and Electromechanics

  30. Steady-State Analysis • Many switching strategies possible • first attempts involve simple common-edge, constant frequency, approach Grainger Center for Electric Machinery and Electromechanics

  31. Steady-State Analysis, cont’d • Begin with basic MIBB, continuous mode • The instantaneous inductor voltage • Setting the average to zero, solving for Vout: Grainger Center for Electric Machinery and Electromechanics

  32. Effective Duty Cycle • The effective duty cycle is the time a switch conducts nonzero current • Can be shown: Grainger Center for Electric Machinery and Electromechanics

  33. Two-Input Case • V1 > V2, D1 > D2 • normal buck-boost, single input • V1 > V2, D2 > D1 Grainger Center for Electric Machinery and Electromechanics

  34. Selecting Duty Cycles • Given prescribed: • Power, Pi, for each source • Output Voltage, Vout • Input Voltages, Vi Grainger Center for Electric Machinery and Electromechanics

  35. Plausibility of Duty Cycles • Sum of all effective duty cycles less than one? • YES, since: • May be issues with extreme duty cycles • same for all converters Grainger Center for Electric Machinery and Electromechanics

  36. Correcting for Nonideal • Simple switch-drop model • More complicated models possible • Feedback to cancel nonidealities Grainger Center for Electric Machinery and Electromechanics

  37. Experimental Continuous Mode • Vary one duty cycle of three • Hold all other constant, constant R load Grainger Center for Electric Machinery and Electromechanics

  38. Discontinuous Mode • Inductor current is zero for some portion of each cycle Grainger Center for Electric Machinery and Electromechanics

  39. Average Output Voltage • Energy balance • Output Voltage • similar to standard buck-boost Grainger Center for Electric Machinery and Electromechanics

  40. Characteristics of Discontinuous Mode • Very sensitive to parameters • feedback a must • Improve accuracy by including • switch drop model • core loss model • taken from Micrometals data sheets • iterative procedure with switch-drop model as starting point Grainger Center for Electric Machinery and Electromechanics

  41. Experimental, Discontinuous • Vary one duty cycle, hold others constant Grainger Center for Electric Machinery and Electromechanics

  42. Other Work at UIUC • Multiple-input flyback • currently being investigated • successful simulation, analysis • Multiple-input boost • n boost converters with common output capacitor • power from unlike solar array sources • simulation, design stage Grainger Center for Electric Machinery and Electromechanics

  43. Work to be Done • Dynamic analysis • Dynamic control • case-by-case? • Static control • power management • case-by-case • Evaluation of topologies • Interchangeable sources • Topology restructuring Grainger Center for Electric Machinery and Electromechanics

More Related