1 / 20

SPIT FIRE MK-V catia project

SPIT FIRE MK-V catia project. Seung -Yong Park 2002012283. Contents. About SPIT FIRE MK-V Method of making parts drawing A finished product. About SPIT FIRE MK-V. This is a excellent fighting plane of second world war. U.S.A, Germany and Japan used for protecting army.

dani
Download Presentation

SPIT FIRE MK-V catia project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SPIT FIRE MK-Vcatia project Seung-Yong Park 2002012283

  2. Contents • About SPIT FIRE MK-V • Method of making parts drawing • A finished product

  3. About SPIT FIRE MK-V • This is a excellent fighting plane of second world war. U.S.A, Germany and Japan used for protecting army. • This model was microcopied 1/48.

  4. Method of making parts drawing • Propeller Using fools pad, draft, circlar pattern. Its role is flying and coming down a flight.

  5. Method of making parts drawing • Spiner It was drawn using tools Revolute, extrude, intersection and split in wireflame and surface. After go to the part design, used thicksurface tool.

  6. SPINER

  7. Method of making parts drawing • Wings In wireframe, like next page drawing draw and make a plane continuing then made a surface using tool a multi-section surface. Next, here was used join, close-surface and pocket.

  8. Tail Wing

  9. Main Wing Main Wing

  10. Method of making parts drawing · Plane Body Method of making plane body is similary made like a wing. Using tools sketch, join and muti-sections surface in wireflame. Next, use a tool close-surface. ,

  11. Plane Body

  12. Plane Body

  13. Other Things • · Exhaust pipe

  14. Other Things · Antena

  15. Other Things • Back wing

  16. Other Things • · A body projecting part

  17. 2D DRAWING

  18. A finished product

  19. A finished product

  20. 감사합니다

More Related