1 / 11

Residential Weatherization Calculator

Deriving Realistic Savings Estimates for the “Uninsulated” House. Residential Weatherization Calculator. What Is The Issue?. All prior evaluations have measured “average” savings for the mix of ResWX measures installed in programs The “average” house already was partially weatherized

Download Presentation

Residential Weatherization Calculator

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Deriving Realistic Savings Estimates for the “Uninsulated” House Residential Weatherization Calculator

  2. What Is The Issue? • All prior evaluations have measured “average” savings for the mix of ResWX measures installed in programs • The “average” house already was partially weatherized • Savings from the installation of individual measures has been estimated using engineering simulation models “calibrated” to an average package of measures.

  3. Simulation Model Assumptions • Historically, all “cost-effectiveness” analysis has held “consumer behavior” (i.e., thermostat set-point) constant across all thermal integrity levels • 65 F weighted average set point • 70 F – 8 hours/day • 62 F – 16 hours/day • This assumes that consumers in very poorly insulated homes would prefer to be just as comfortable as those in well insulated homes

  4. Prior Modeling Assumption Justification • Experience in the Hood River Conservation Project showed that once houses were “super-weatherized” consumers: • Stopped burning as much wood • Set up the thermostat on their electric heat • BPA ResWX evaluations have shown that “net” savings increased over time as comparison group use “rebounded” after the rate increases of the early 1980’s dissipated • If they can afford it, people will keep their homes warmer

  5. Re-Calibration Process • Compared Simulated Space Heating Use with Sub-metered Space Heating Use • Sample – 617 SGC Homes w/Zonal Heat (Sample contains only sub-metered homes with space heating use of at least 1.0 kWh/sq/ft/yr.) • Some homes had wood heat & used it • Average Use = 3.48 kWh/sq.ft./yr • Average Size = 1596 sq.ft. • Weather – Portland & Seattle

  6. Approach • Fit Regression Line Through Sub-metered Use vs. Building Heat Loss Rate • Adjusted SUNDAY Simulation Set-point Temperature, Thermal Mass and Internal Gains to Match “Heating Slope” of SGC Data Set

  7. SGC Sub-metered Use vs. Building Heat Loss Rate

  8. Simulations Results Compared to SGC Submetered Data – Total UA

  9. Simulations Results Compared to SGC Submetered Data – UA/Sq.Ft.

  10. Sample Results Zone 11350 sq.ft. Home w/Zonal Heat

  11. Recommendation • Use Standard Modeling Input Assumptions for purposes of determining “cost-effectiveness” • Use “Modified” Modeling Input Assumptions for purposes of estimating “realizable” savings from weatherization • Thermostat set-point decreases by 0.1 F for every 15 Btu-F Increase in Heat Loss Rate for non-basement house and 0.15 F for homes with basements • 3000 Btu/hr Internal Gains (Inefficient Appliances)

More Related