1 / 16

Crystallography and Structure

Crystallography and Structure. Overview:. Crystal Structure – matter assumes a periodic shape Non-Crystalline or Amorphous “structures” exhibit no long range periodic shapes Xtal Systems – not structures but potentials FCC, BCC and HCP – common Xtal Structures for metals

ducote
Download Presentation

Crystallography and Structure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Crystallography and Structure

  2. Overview: • Crystal Structure – matter assumes a periodic shape • Non-Crystalline or Amorphous “structures” exhibit no long range periodic shapes • Xtal Systems – not structures but potentials • FCC, BCC and HCP – common Xtal Structures for metals • Point, Direction and Planer ID’ing in Xtals • X-Ray Diffraction and Xtal Structure

  3. CRYSTAL STRUCTURES Crystal Structure • Means: PERIODIC ARRANGEMENT OF ATOMS/IONS • OVER LARGE ATOMIC DISTANCES • Leads to structure displayingLONG-RANGE ORDER that is Measurable and Quantifiable All metals, many ceramics, and some polymers exhibit this “High Bond Energy” and a More Closely Packed Structure

  4. Materials Lacking Long range order Amorphous Materials These less densely packed lower bond energy “structures” can be found in Metals are observed in Ceramic GLASS and many “plastics”

  5. Fig. 3.4, Callister 7e. Crystal Systems – Some Definitional information Unit cell: smallest repetitive volume which contains the complete lattice pattern of a crystal. 7 crystal systems of varying symmetry are known These systems are built by changing the lattice parameters:a, b, and c are the edge lengths , , and  are interaxial angles

  6. Crystal Systems Crystal structures are divided into groups according to unit cell geometry (symmetry).

  7. Metallic Crystal Structures • Tend to be densely packed. • Reasons for dense packing: - Typically, only one element is present, so all atomic radii are the same. - Metallic bonding is not directional. - Nearest neighbor distances tend to be small in order to lower bond energy. - Electron cloud shields cores from each other • Have the simplest crystal structures. We will examine three such structures (those of engineering importance) called: FCC, BCC and HCP – with a nod to Simple Cubic

  8. Crystal Structure of Metals – of engineering interest

  9. Simple Cubic Structure (SC) • Rare due to low packing density (only Po – Polonium -- has this structure) • Close-packed directions are cube edges. • Coordination No. = 6 (# nearest neighbors) for each atom as seen (Courtesy P.M. Anderson)

  10. Atomic Packing Factor (APF) volume atoms atom 4 a 3 unit cell p (0.5a) 3 R=0.5a volume close-packed directions unit cell contains (8 x 1/8) = 1 atom/unit cell Adapted from Fig. 3.23, Callister 7e. Volume of atoms in unit cell* APF = Volume of unit cell *assume hard spheres • APF for a simple cubic structure = 0.52 1 APF = 3 a Here: a = Rat*2 Where Rat is the ‘handbook’ atomic radius

  11. Body Centered Cubic Structure (BCC) • Atoms touch each other along cube diagonals within a unit cell. --Note: All atoms are identical; the center atom is shaded differently only for ease of viewing. ex: Cr, W, Fe (), Tantalum, Molybdenum Adapted from Fig. 3.2, Callister 7e. • Coordination # = 8 2 atoms/unit cell: (1 center) + (8 corners x 1/8) (Courtesy P.M. Anderson)

  12. Atomic Packing Factor: BCC a 3 a 2 Close-packed directions: R 3 a length = 4R = a atoms volume 4 3 p ( 3 a/4 ) 2 unit cell atom 3 APF = volume 3 a unit cell a Adapted from Fig. 3.2(a), Callister 7e. • APF for a body-centered cubic structure = 0.68

  13. Face Centered Cubic Structure (FCC) • Atoms touch each other along face diagonals. --Note: All atoms are identical; the face-centered atoms are shaded differently only for ease of viewing. ex: Al, Cu, Au, Pb, Ni, Pt, Ag • Coordination # = 12 Adapted from Fig. 3.1, Callister 7e. 4 atoms/unit cell: (6 face x ½) + (8 corners x 1/8) (Courtesy P.M. Anderson)

  14. Atomic Packing Factor: FCC Close-packed directions: 2 a length = 4R = 2 a Unit cell contains: 6 x1/2 + 8 x1/8 = 4 atoms/unit cell a atoms volume 4 3 p ( 2 a/4 ) 4 unit cell atom 3 APF = volume 3 a unit cell • APF for a face-centered cubic structure = 0.74 The maximum achievable APF! (a = 22*R) Adapted from Fig. 3.1(a), Callister 7e.

  15. Hexagonal Close-Packed Structure (HCP) A sites Top layer c Middle layer B sites A sites Bottom layer a ex: Cd, Mg, Ti, Zn • ABAB... Stacking Sequence • 3D Projection • 2D Projection Adapted from Fig. 3.3(a), Callister 7e. 6 atoms/unit cell • Coordination # = 12 • APF = 0.74 • c/a = 1.633 (ideal)

More Related