Download
1 / 22
220 likes | 383 Views
DSM, energy modesty, energy efficiency and energy intensity Demystified ?. Albrecht Kaupp, Manager Indo-German Energy Programme, IGEN,. Demand Side Management, DSM. Original definition coined 1972 by Gelling, EPRI, USA.
E N D
DSM, energy modesty, energy efficiency and energy intensity Demystified ? Albrecht Kaupp, ManagerIndo-German Energy Programme, IGEN,
Demand Side Management, DSM Original definition coined 1972 by Gelling, EPRI, USA. “The planning and implementation of those utility activities designed to influence customer use of electricity in ways that will produce desired changes in the utility’s load shape”.
History of DSM DSM was promoted by over 2000 DSM programmes of about 1000 utilities in the USA between 1973 and 1998. After deregulation of the power sector in the USA, most DSM programmes collapsed and about 40 programmes were left in 1999. Utilities in Germany and Japan never bothered about national DSM programmes.
Power utility intention behind DSM Cut the “kW-load peaks” and fill up the “kW-load valleys” without reducing kWh electricity consumption of well paying customers, since they are a source of profit for a power utility. Electricity savings (kWh) was a side effect of DSM but never the objective.
DSM makes only sense for a power utility, if • DSM is applied to all non paying or below delivery cost paying customers, or • DSM activities strictly reduce peak load without cutting into revenues from well paying customers.
No win-win situation A professional consulting firm offering services to an industrial customers to reduce electricity costs is not in the interest of a power utility. Why? The consulting firm gets only business from industry/ commerce that pay high power tariffs and do not steal power. In other words a professional energy auditor will always cut into the profit of a power utility.
Sharing of global responsibilities ! Energy efficiency and energy modesty is not any longer a national issue. It is a global responsibility of every country to practice energy modesty in particular industrialised and highly urbanised consumer societies.
Energy Conservation Day 14th December 2004 “We cannot blindly ape the west and pursue a highly resource intensive development or for that matter, resource intensive consumption patterns. We must be under no illusion that we can in fact approximate consumption levels as we see them in the affluent western society. Indeed, in the interest of humanity and the sustainability of our life support system on this planet, it is the West that must bring its energy consumption level closer to ours rather than the other way round”. Honourable Prime Minister of India
Check for excessive consumption despite high energy efficiency Per capita electricity consumption is the best indicator of “quality of life” Electricity consumption per capita (kWh)
Energy intensity (TOE/ GDP) Energy intensity is a good indicator of the development stage of a country in terms of (i) Industrialisation (ii) Urbanisation (iii) Electrification (iv) Consumerism (v) Saturation of market for electrical appliances and cars However it is a poor and perhaps irrelevant indicator to judge the “energy efficiency and energy modesty” of a nation. High energy intensities had been the past trademark of development of today’s highly industrialised countries and are therefore not so unusual for emerging economics.
How important is energy efficiency for the power sector 1. Non-paying customer # 1 the “T+D system” at speculatively estimated 10% - 25% technical loss. 2. Non-paying customer # 2 “station use” at speculative 8% loss. In other words two large consumers, Mr. Station loss and Mrs. T+D loss may consume > 25% and don’t pay for it. 3. Add to this the fuel energy loss of power generation at a average national power plant efficiency of 30.5%. The later figure however may be debatable.
Which plant efficiency do you fancy? Lignite coal 3500 kCal/kg Difference between GCV and NCV is 6.2%
How efficient are Indian power plants? This may be the wrong question. It is better to ask how can we better establish and verify the present performance at the present configuration with the least effort. Mapping software
Do you want energy efficiency for charity or aim for financial and economic attractiveness? There is always a most economic power plant efficiency based on fuel costs, expected IRR, technical life and plant load factor. The calculation principle is simple and based on the question. “What premium could be paid for a plant if system efficiency is say better by 4% points” under the assumption that premium is recovered through fuel cost savings.
Which are the important industries for energy efficiency and conservation Order of magnitude rating A = Total energy consumption in TOE B = Energy cost as percentage of total cost C = Energy intensity “TOE/ Annual turnover”
Important impact check Whatever policies, projects and programmes will be formulated and implemented in the power sector under the headings of energy efficiency, energy modesty or DSM asking the questions “Does the measure help to decouple economic growth from growth in power consumption” is a good way to start a discussion about the merit of the measure.
My equation for a global sustainable energy policy, GSEP GSEP = energy modesty + energy efficiency + renewable energy Exactly in this order of priority
Forcing more energy efficient electrical appliances into the market ! Which way to go? Two major policy choices are Choice 1: Believe in market forces and goodwill of a consumer. In other words believe in the existence of a well informed and cosmopolitan consumer who understands global energy supply and consumption issues and even acts rational by buying equipment with the lowest life cycle cost . Choice 2: Remove the inefficient appliances from the market.
