1 / 22

Single-view geometry

Single-view geometry. Odilon Redon, Cyclops , 1914. X?. X?. X?. Our goal: Recovery of 3D structure. Recovery of structure from one image is inherently ambiguous. x. Our goal: Recovery of 3D structure. Recovery of structure from one image is inherently ambiguous.

lan
Download Presentation

Single-view geometry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Single-view geometry Odilon Redon, Cyclops, 1914

  2. X? X? X? Our goal: Recovery of 3D structure • Recovery of structure from one image is inherently ambiguous x

  3. Our goal: Recovery of 3D structure • Recovery of structure from one image is inherently ambiguous

  4. Our goal: Recovery of 3D structure • Recovery of structure from one image is inherently ambiguous

  5. Ames Room http://en.wikipedia.org/wiki/Ames_room

  6. Our goal: Recovery of 3D structure • We will need multi-view geometry

  7. Recall: Pinhole camera model • Principal axis: line from the camera center perpendicular to the image plane • Normalized (camera) coordinate system: camera center is at the origin and the principal axis is the z-axis

  8. Recall: Pinhole camera model

  9. Principal point • Principal point (p): point where principal axis intersects the image plane • Normalized coordinate system: origin of the image is at the principal point • Image coordinate system: origin is in the corner • How to go from normalized coordinate system to image coordinate system? py px

  10. Principal point offset principal point: py px

  11. Principal point offset principal point: calibration matrix

  12. Pixel coordinates • mx pixels per meter in horizontal direction, my pixels per meter in vertical direction Pixel size: m pixels pixels/m

  13. Camera rotation and translation • In general, the camera coordinate frame will be related to the world coordinate frame by a rotation and a translation • Conversion from world to camera coordinate system (in non-homogeneous coordinates): coords. of point in camera frame coords. of camera center in world frame coords. of a pointin world frame

  14. Camera rotation and translation Note: C is the null space of the camera projection matrix (PC=0)

  15. Camera parameters • Intrinsic parameters • Principal point coordinates • Focal length • Pixel magnification factors • Skew (non-rectangular pixels) • Radial distortion

  16. Camera parameters • Intrinsic parameters • Principal point coordinates • Focal length • Pixel magnification factors • Skew (non-rectangular pixels) • Radial distortion • Extrinsic parameters • Rotation and translation relative to world coordinate system

  17. Camera calibration

  18. Xi xi Camera calibration • Given n points with known 3D coordinates Xi and known image projections xi, estimate the camera parameters

  19. Camera calibration: Linear method Two linearly independent equations

  20. Camera calibration: Linear method • P has 11 degrees of freedom • One 2D/3D correspondence gives us two linearly independent equations • Homogeneous least squares: find p minimizing ||Ap||2 • Solution given by eigenvector of ATA with smallest eigenvalue • 6 correspondences needed for a minimal solution

  21. Camera calibration: Linear method • Note: for coplanar points that satisfy ΠTX=0,we will get degenerate solutions (Π,0,0), (0,Π,0), or (0,0,Π)

  22. Camera calibration: Linear method • Advantages: easy to formulate and solve • Disadvantages • Doesn’t directly tell you camera parameters • Doesn’t model radial distortion • Can’t impose constraints, such as known focal length and orthogonality • Non-linear methods are preferred • Define error as squared distance between projected points and measured points • Minimize error using Newton’s method or other non-linear optimization

More Related