1 / 10

Threaded Rods and Cables

Threaded Rods and Cables. When slenderness is not a consideration, circular rods and cables are often used (hangers, suspended bridges). Rods are solid and cables are made from individual strands wound together.

lyris
Download Presentation

Threaded Rods and Cables

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Threaded Rods and Cables • When slenderness is not a consideration, circular rods and cables are often used (hangers, suspended bridges). • Rods are solid and cables are made from individual strands wound together. • Threading the end of a rod reduces the cross sectional area (upset end prevents such reduction, but is expensive).

  2. Threaded Rods and Cables • A strand consists of individual wires wound helically around a centrl core. • A wire rope is made of several strands laid helically around a core.

  3. Tension Members in Roof Truss • Trusses are used where the cost and weight of a beam could be prohibitive (long spans). • A truss may be thought of as a deep beam with much of the web removed. • Tension members in roof trusses include some truss members and sag rods.

  4. Sag Rods • Sag rods are used to provide lateral support for the purlins (to prevent sag in direction parallel to a sloping roof due to vertical applied loads). • They are designed to support the component of roof loads parallel to the roof.

  5. Sag Rods • Each segment between purlins is assumed to support everything below it; thus the top rod is designed for the load on the roof area tributary to the rod, from the heel of the truss to the peak.

  6. Sag Rods • The tie rod between ridge purlins must resist the load from all of the sag rods on either side.

More Related