1 / 22

VLSI DESIGN DOMAIN

VLSI DESIGN DOMAIN. Practical application of VLSI Design?. INTRODUCTION. Systems based on Magnetically controlled switches Vacuum Tubes Analog Digital. HISTORICAL PERSPECTIVE. 1930 - O.Heil and Lilienfeld – FET 1947 – Bardeen, Brattain and Shockley, AT & T Bell Labs, - BJT

malana
Download Presentation

VLSI DESIGN DOMAIN

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. VLSI DESIGN DOMAIN • Practical application of VLSI Design?

  2. INTRODUCTION • Systems based on Magnetically controlled switches • Vacuum Tubes • Analog • Digital

  3. HISTORICAL PERSPECTIVE • 1930 - O.Heil and Lilienfeld – FET • 1947 – Bardeen, Brattain and Shockley, AT & T Bell Labs, - BJT • 1958 – Jack Kilby, Texas Instruments, Hybrid IC • Jack Kilby was awarded the year 2000 Nobel prize

  4. LEVEL OF INTEGRATION Level of Number Typical Integration of Gates Applications SSI 1-10 Basic Gates MSI 10-100 Counters,Decoder, Encoder LSI 100-1000 Memories, ADC/DAC VLSI 1000-10,000 MPU’s ULSI 10,000-100,000 DSP, DEC ALPHA

  5. Evolution in Complexity

  6. Evolution in Speed/Performance

  7. TRANSISTOR FEATURE SIZE

  8. Silicon in 2010 Die Area: 2.5x2.5 cm Voltage: 0.6 V Technology: 0.07 m

  9. TERMINOLOGY • Manufacturing Lead Time(Turnaround Time) – The time it takes to make an IC excluding the design time. • Integrated Circuit – Combination of circuit elements inseparably associated on or within a substrate. • Substrate – Supporting material. • Monolithic IC – An IC whose elements are formed on or within a substrate. • Hybrid IC – Consists of a combination of two or more ICs or an IC with some discrete components.

  10. TERMINOLOGY • Wafer(Slice) – Contains many ICs. Circular in nature. Diameter – 4, 5, or 6 inches. • Chip(die or bar) – Repeated ICs on a wafer. • Test Plug(Process Control Bar Process Control Monitor) - Special Chip Used to monitor the process parameters of the technology.Used to derive the timing models-Wafer can be discarded.

  11. TERMINOLOGY • Defect Density - Lethal defects per cm2 • Yield - Yield = No. of Good Chips on a Wafer/Total Number of Chips • Utilization Factor - Utilization Factor = Used Chip Area/Total Chip Area • SOC- System On Chip

  12. PERIODIC SYSTEM

  13. Intrinsic Si Ideal crystal structure Valance 4 Almost no free carriers Almost no conduction SEMICONDUCTOR PHYSICS

  14. Doping with valance 5 atoms (Phosphor, Arsenic) introduces “Loose electrons” Electron donor Conductivity depends on doping level SEMICONDUCTOR PHYSICS

  15. Doping with valance 3 atoms (Boron) introduces “Loose Holes” Electron acceptors Hole conductivity lower than electron conductivity SEMICONDUCTOR PHYSICS

More Related