1 / 16

Turbines

Turbines. Thermodynamics Professor Lee Carkner Lecture 18. Ideal gas law P v = RT P v /T = P v /T Isentropic (constant specific heats) (T 2 /T 1 ) = ( v 1 / v 2 ) k-1 (T 2 /T 1 ) = (P 2 /P 1 ) (k-1)/k (P 2 /P 1 ) = ( v 1 / v 2 ) k q = 0 Isentropic (variable specific heats)

mio
Download Presentation

Turbines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Turbines Thermodynamics Professor Lee Carkner Lecture 18

  2. Ideal gas law Pv = RT Pv/T = Pv/T Isentropic (constant specific heats) (T2/T1) = (v1/v2)k-1 (T2/T1) = (P2/P1)(k-1)/k (P2/P1) = (v1/v2)k q = 0 Isentropic (variable specific heats) (P2/P1) = (Pr2/Pr1) (v2/v1) = (vr2/vr1) Pr and vr are functions of T and you can use to look up u and h Isochoric v = v q = cvDT = Du Isobaric P = P q = cpDT = Dh w = PDv Isothermal T = T q = w Engine Cheat Sheet

  3. PAL # 17 Gas Power Cycles • Otto engine: rc = 8, qin = 750 kJ/kg, P1 = 95 kPa and T1 = 300 K, R = 0.287, k =1.4, cv = 0.718 • Pv = RT, v1 = RT1/P1 = (0.287)(300)/(95) = 0.906 m3/kg = vmax = v4 • rc = vmax/vmin, vmin = vmax/rc = 0.906/8 = 0.113 = v2 = v3 • T2 = T1(v1/v2)k-1 = (300)(8)0.4 = 689 K

  4. PAL # 17 Gas Power Cycles • DT = q/cv, T3 = (q/cv)+T2 = (750/0.718)+689 =1734 • T4 = T3(v3/v4)k-1 = (1734)(1/8)0.4 = 755 • P3 = (0.287)(1734)/ 0.113 = 4404 kPa • Find heats and work • qout = cv(T4-T1) = (0.718)(755-300) = 327 kJ/kg • Find efficiency and MEP • hth = w/qin = 423/750 = 0.564 = 56.4% • MEP = w/(vmax-vmin) = 423/(0.906-0.113) = 533 kPa

  5. Brayton Cycle • Used for electricity generation and propulsion • Ideal, air standard, Brayton cycle: • Isentropic compression (compressor) • Isentropic expansion (turbine) • We replace ignition and exhaust with heat input and output to make a closed cycle

  6. Brayton Efficiency • The heat in and out take place during constant pressure processes so: • We can use this to write the efficiency as: hth,Brayton = 1 – qout/qin = 1 – (T4-T1)/(T3-T2) • We can relate the temperatures to the pressures with the isentropic relation: • (T2/T1) = (P2/P1)(k-1)/k • And thus the efficiency is hth,Brayton = 1 – 1/rp(k-1)/k

  7. Brayton Turbines • Higher pressure ratio produces more efficiency • Limited by the temperature the turbine blades can withstand • Generally have better power to weight ratios than reciprocating engines, but are more expensive and use more fuel

  8. Regeneration • We can use them to heat the input gases • Such a system called a regenerator • Extra efficiency not always worth the expense of the installation and operation costs

  9. Effectiveness • The gas from the compressor enters the regenerator at T2 and leaves at T5 • We can compare the actual energy gain with the best case with the effectiveness, e • e = • For cold air standard, Dh = cpDT so • e = (T5-T2)/(T4-T2)

  10. Regeneration Efficiency • Effectiveness generally around 0.85 • The efficiency of a turbine with regeneration is: hth,regen = 1 – (T1/T3)rp(k-1)/k • Regeneration most effective at low rp and when the difference between the temperatures is high

  11. Multistage • We do this by using multistage processes where the fluid is heated or cooled between stages • Called intercooling or reheating • Depending on the number of stages • More stages makes the device for complicated and expensive

  12. Multistage Properties • The ratio of the input and output pressures of the compressors are equal P2/P1 = P4/P3 P6/P7 = P8/P9 • The input temperatures and enthalpies are the same of each compressor T1 = T3, h1 = h3

  13. Jet Propulsion • If we reduce the work produced by a turbine to just enough to power the compressor, the exit gases will have a lot of energy • Used for aircraft propulsion • Amount of force (or thrust) is just the difference between the input and output momentum

  14. Jet Efficiency • If the wind velocity is small, Vinlet is equal to the aircraft’s speed • The propulsive power of a turbojet is just: Wp’ = FVaircraft = m’(Vexit-Vinlet)Vaircraft hp = W’p/Q’in

  15. Turbofan Has a turbine powered fan up front to move more air through Afterburner Ignite exhaust gases for burst of speed Ramjet A engine that is all afterburner Scramjet Supersonic ramjet Rocket A ramjet with its own air supply Kinds of Jets

  16. Next Time • Read: 10.1-10.5 • Homework: Ch 9, P: 95, 121, Ch 10, P: 15, 34

More Related