1 / 63

Chapter 4 Field-Effect Transistors

Chapter 4 Field-Effect Transistors. Microelectronic Circuit Design Richard C. Jaeger Travis N. Blalock. Chap4- 1. Chapter Goals. Describe operation of MOSFETs and JFETs. Define FET characteristics in operation regions of cutoff, triode and saturation.

omer
Download Presentation

Chapter 4 Field-Effect Transistors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 4Field-Effect Transistors Microelectronic Circuit Design Richard C. Jaeger Travis N. Blalock Microelectronic Circuit Design McGraw-Hill Chap4-1

  2. Chapter Goals • Describe operation of MOSFETs and JFETs. • Define FET characteristics in operation regions of cutoff, triode and saturation. • Develop mathematical models for i-v characteristics of MOSFETs and JFETs. • Introduce graphical representations for output and transfer characteristic descriptions of electron devices. • Define and contrast characteristics of enhancement-mode and depletion-mode FETs. • Define symbols to represent FETs in circuit schematics. • Investigate circuits that bias transistors into different operating regions. • Learn basic structure and mask layout for MOS transistors and circuits. • Explore MOS device scaling Microelectronic Circuit Design McGraw-Hill Chap1-2

  3. Chapter Goals (contd.) • Contrast 3 and 4 terminal device behavior. • Descibe sources of capacitance in MOSFETs and JFETs. • Explore FET modeling in SPICE. Microelectronic Circuit Design McGraw-Hill Chap1-3

  4. Types of Field-Effect Transistors • MOSFET (Metal-Oxide Semiconductor Field-Effect Transistor) • Primary componenet in high-density VLSI chips such as memories and microprocessors • JFET (Junction Field-Effect Transistor) • Finds application especially in analog and RF circuit design Microelectronic Circuit Design McGraw-Hill Chap1-4

  5. MOS Capacitor Structure • First electrode- Gate : Consists of low-resistivity material such as polycrystalline silicon • Second electrode- Substrate or Body: n- or p-type semiconductor • Dielectric-Silicon dioxide:stable high-quality electrical insulator between gate and substrate. Microelectronic Circuit Design McGraw-Hill Chap1-5

  6. Substrate Conditions for Different Biases • Accumulation • VG<<VTN • Depletion • VG<VTN • Inversion • VG>VTN Microelectronic Circuit Design McGraw-Hill Chap1-6

  7. Low-frequency C-V Characteristics for MOS Capacitor on P-type Substrate • MOS capacitance is non-linear function of voltage. • Total capacitance in any region dictated by the separation between capacitor plates. • Total capacitance modeled as series combination of fixed oxide capacitance and voltage-dependent depletion layer capacitance. Microelectronic Circuit Design McGraw-Hill Chap1-7

  8. NMOS Transistor: Structure • 4 device terminals: Gate(G), Drain(D), Source(S) and Body(B). • Source and drain regions form pn junctions with substrate. • vSB, vDSand vGS always positive during normal operation. • vSB always < vDS and vGS to reverse bias pn junctions Microelectronic Circuit Design McGraw-Hill Chap1-8

  9. NMOS Transistor: Qualitative I-V Behavior • VGS<<VTN : Only small leakage current flows. • VGS<VTN: Depletion region formed under gate merges with source and drain depletion regions. No current flows between source and drain. • VGS>VTN: Channel formed between source and drain. If vDS>0,, finite iD flows from drain to source. • iB=0 andiG=0. Microelectronic Circuit Design McGraw-Hill Chap1-9

  10. NMOS Transistor: Triode Region Characteristics for where, Kn= Kn’W/L Kn’=μnCox’’ (A/V2) Cox’’=εox/Tox εox=oxide permittivity (F/cm) Tox=oxide thickness (cm) Microelectronic Circuit Design McGraw-Hill Chap1-10

  11. NMOS Transistor: Triode Region Characteristics (contd.) • Output characteristics appear to be linear. • FET behaves like a gate-source voltage-controlled resistor between source and drain with Microelectronic Circuit Design McGraw-Hill Chap1-11

  12. MOSFET as Voltage-Controlled Resistor Example 1: Voltage-Controlled Attenuator If Kn=500μA/V2, VTN=1V, R=2kΩ and VGG=1.5V, then, If Kn=500μA/V2, VTN=1V, R=2kΩ and VGG=1.5V, then, To maintain triode region operation, or or Microelectronic Circuit Design McGraw-Hill Chap1-12

  13. MOSFET as Voltage-Controlled Resistor (contd.) Example 2: Voltage-Controlled High-Pass Filter Voltage Transfer function, where, cut-off frequency If Kn=500μA/V2, VTN=1V, C=0.02μF and VGG=1.5V, then, To maintain triode region operation, Microelectronic Circuit Design McGraw-Hill Chap1-13

  14. NMOS Transistor: Saturation Region • If vDS increases above triode region limit, channel region disappears, also said to be pinched-off. • Current saturates at constant value, independent of vDS. • Saturation region operation mostly used for analog amplification. Microelectronic Circuit Design McGraw-Hill Chap1-14

  15. NMOS Transistor: Saturation Region (contd.) for is also called saturation or pinch-off voltage Microelectronic Circuit Design McGraw-Hill Chap1-15

  16. Transconductance of a MOS Device • Transconductance relates the change in drain current to a change in gate-source voltage • Taking derivative of the expression for the drain current in saturation region, Microelectronic Circuit Design McGraw-Hill Chap1-16

  17. Channel-Length Modulation • As vDS increases abovevDSAT,length of depleted channel beyond pinch-off point, DL, increases and actual L decreases. • iD increases slightly with vDSinstead of being constant. l= channel length modulation parameter Microelectronic Circuit Design McGraw-Hill Chap1-17

  18. Depletion-Mode MOSFETS • NMOS transistors with • Ion implantation process used to form a built-in n-type channel in device to connect source and drain by a resistive channel • Non-zero drain current for vGS=0, negative vGS required to turn device off. Microelectronic Circuit Design McGraw-Hill Chap1-18

  19. Transfer Characteristics of MOSFETS • Plots drain current versus gate-source voltage for a fixed drain-source voltage Microelectronic Circuit Design McGraw-Hill Chap1-19

  20. Body Effect or Substrate Sensitivity • Non-zero vSBchanges threshold voltage, causing substrate sensitivity modeled by where VTO= zero substrate bias for VTN (V) g= body-effect parameter ( ) 2FF= surface potential parameter (V) Microelectronic Circuit Design McGraw-Hill Chap1-20

  21. Enhancement-Mode PMOS Transistors: Structure • P-type source and drain regions in n-type substrate. • vGS<0 required to create p-type inversion layer in channel region • For current flow, vGS< vTP • To maintain reverse bias on source-substrate and drain-substrate junctions, vSB <0 and vDB <0 • Positive bulk-source potential causes VTP to become more negative Microelectronic Circuit Design McGraw-Hill Chap1-21

  22. Enhancement-Mode PMOS Transistors: Output Characteristics • For , transistor is off. • For more negative vGS, drain current increases in magnitude. • PMOS is in triode region for small values of VDS and in saturation for larger values. Microelectronic Circuit Design McGraw-Hill Chap1-22

  23. MOSFET Circuit Symbols • (g) and(i) are the most commonly used symbols in VLSI logic design. • MOS devices are symmetric. • In NMOS, n+ region at higher voltage is the drain. • In PMOS p+ region at lower voltage is the drain Microelectronic Circuit Design McGraw-Hill Chap1-23

  24. Process-defining Factors • Minimum Feature Size, F : Width of smallest line or space that can be reliably transferred to wafer surface using given generation of lithographic manufacturing tools • Alignment Tolerance, T: Maximum misalignment that can occur between two mask levels during fabrication Microelectronic Circuit Design McGraw-Hill Chap1-24

  25. Mask Sequence for a Polysilicon-Gate Transistor • Mask 1: Defines active area or thin oxide region of transistor • Mask 2: Defines polysilicon gate of transistor, aligns to mask 1 • Mask 3: Delineates the contact window, alogns to mask 2. • Mask 4: Delineates the metal pattern, aligns to mask 3. • Channel region of transistor formed by intersection of first two mask layers. Source and Drain regions formed wherever mask 1 is not covered by mask 2 Microelectronic Circuit Design McGraw-Hill Chap1-25

  26. Basic Ground Rules for Layout • F=2Λ • T=F/2=L, L could be1, 0.5, 0.25 mm, etc. Microelectronic Circuit Design McGraw-Hill Chap1-26

  27. Internal Capacitances in Electronic Devices • Limit high-frequency performance of the electronic device they are associated with. • Limit switching speed of circuits in logic applications • Limit frequency at which useful amplification can be obtained in amplifiers. • MOSFET capacitances depend on operation region and are non-linear functions of voltages at device terminals. Microelectronic Circuit Design McGraw-Hill Chap1-27

  28. NMOS Transistor Capacitances: Triode Region Cox” =Gate-channel capacitance per unit area(F/m2). CGC =Total gate channel capacitance. CGS= Gate-source capacitance. CGD =Gate-drain capacitance. CGSO and CGDO = overlap capacitances (F/m). Microelectronic Circuit Design McGraw-Hill Chap1-28

  29. NMOS Transistor Capacitances: Triode Region (contd.) CSB = Source-bulk capacitance. CDB = Drain-bulk capacitance. ASand AD = Junction bottom area capacitance of the source and drain regions. PS and PD = Perimeter of the source and drain junction regions. Microelectronic Circuit Design McGraw-Hill Chap1-29

  30. NMOS Transistor Capacitances: Saturation Region • Drain no longer connected to channel Microelectronic Circuit Design McGraw-Hill Chap1-30

  31. NMOS Transistor Capacitances: Cutoff Region • Conducting channel region completely gone. CGB = Gate-bulk capacitance CGBO = gate-bulk capacitance per unit width. Microelectronic Circuit Design McGraw-Hill Chap1-31

  32. SPICE Model for NMOS Transistor Typical default values used by SPICE: Kn or Kp = 20 mA/V2 g = 0 l= 0 VTO = 1 V mn or mp= 600 cm2/V.s 2FF = 0.6 V CGDO=CGSO=CGBO=CJSW= 0 Tox= 100 nm Microelectronic Circuit Design McGraw-Hill Chap1-32

  33. Bias Analysis Approach • Assume an operation region (generally the saturation region) • Use circuit analysis to find VGS • Use VGS to calculate ID, and ID to find VDS • Check validity of operation region assumptions • Change assumptions and analyze again if required. NOTE :An enhancement-mode device with VDS = VGS is always in saturation Microelectronic Circuit Design McGraw-Hill Chap1-33

  34. Four-Resistor and Two-Resistor Biasing • Provide excellent bias for transistors in discrete circuits. • Stabilize bias point with respect to device parameter and temperature variations using negative feedback. • Use single voltage source to supply both gate-bias voltage and drain current. • Generally used to bias transistors in saturation region. • Two-resistor biasing uses lesser components that four-resistor biasing and also isolates drain and gate terminals Microelectronic Circuit Design McGraw-Hill Chap1-34

  35. Bias Analysis: Example 1 (Four-Resistor Biasing) Assumption: Transistor is saturated, IG=IB=0 Analysis: First, simplify circuit, split VDD into two equal-valued sources and apply Thevenin transformation to find VEQ and REQ for gate-bias voltage Problem: Find Q-pt (ID, VDS) Approach: Assume operation region, find Q-point, check to see if result is consistent with operation region Microelectronic Circuit Design McGraw-Hill Chap1-35

  36. Bias Analysis: Example 1 (Four-Resistor Biasing) (contd.) Since VGS<VTNfor VGS= -2.71 V and MOSFET will be cut-off, and ID= 34.4 mA Also, Since IG=0, VDS>VGS-VTN. Hence saturation region assumption is correct. Q-pt: (34.4 mA, 6.08 V) with VGS= 2.66 V Microelectronic Circuit Design McGraw-Hill Chap1-36

  37. Bias Analysis: Example 2 (Four-Resistor Biasing) Analysis with body effect using same assumptions as in example 1: • Estimate value of ID and use it to find VGS and VSB • Use VSB to calculate VTN • Find ID’ using above 2 steps • If ID’ is not same as original ID estimate, start again. Iterative solution can be found by following steps: Microelectronic Circuit Design McGraw-Hill Chap1-37

  38. Bias Analysis: Example 2 (Four-Resistor Biasing) (contd.) The iteration sequence leads to ID= 88.0 mA VDS>VGS-VTN. Hence saturation region assumption is correct. Q-pt: (88.0 mA, 6.48 V) Microelectronic Circuit Design McGraw-Hill Chap1-38

  39. and ID= 130 mA Bias Analysis: Example 3 (Two-Resistor Biasing) Since VGS<VTNfor VGS= -0.769V and MOSFET will be cut-off, Assumption:IG=IB=0, transistor is saturated (since VDS= VGS) Analysis: VDS>VGS-VTN. Hence saturation region assumption is correct. Q-pt: (130 mA, 2.00 V) Microelectronic Circuit Design McGraw-Hill Chap1-39

  40. Bias Analysis: Example 4 ( Biasing in Triode Region) Also But VDS<VGS-VTN. Hence, saturation region assumption is incorrect Using triode region equation, Assumption:IG=IB=0, transistor is saturated (since VDS= VGS) Analysis: VGS=VDD=4 V and ID=1.06 mA VDS<VGS-VTN, transistor is in triode region Q-pt:(1.06 mA, 2.3 V) Microelectronic Circuit Design McGraw-Hill Chap1-40

  41. Bias Analysis: Example 5 (Two-Resistor biasing for PMOS Transistor) Also Since VGS= -0.369 V is less than VTP= -2 V, VGS = -3.45 V ID = 52.5mA and VGS = -3.45 V Assumption:IG=IB=0, transistor is saturated (since VDS= VGS) Analysis: Hence saturation assumption is correct. Q-pt: (52.5 mA, -3.45 V) Microelectronic Circuit Design McGraw-Hill Chap1-41

  42. MOSFET as Current Source • Ideal current source gives fixed output current regardless of voltage across it. • MOSFET behaves as as an ideal current source if biased in the pinch-off region (output current depends on terminal voltage). Microelectronic Circuit Design McGraw-Hill Chap1-42

  43. NMOS Current Mirror But VGS2=VGS1 Assumption:M1 and M2 have identical VTN, Kn’, l and W/L and are in saturation. Thus, output current mirrors reference current if VDS1=VDS2. Microelectronic Circuit Design McGraw-Hill Chap1-43

  44. NMOS Current Mirror: Example Given data:IREF= 50 mA, VO= 12 V, VTN= 1 V, Kn= 150 mA/V2, l= 0.0133 V-1 Determine:VGS, VDS1, IO Analysis: Using trial-and-error, Hence, VDS1 =1.81 V. Also, VDS2=12 V Microelectronic Circuit Design McGraw-Hill Chap1-44

  45. MOS Current Mirror Ratio Thus, ratio between IO and IREF can be modified by changing W/L ratios of the current mirror transistors (ignoring differences due to VDSmismatch) Microelectronic Circuit Design McGraw-Hill Chap1-45

  46. MOS Current Mirror Output Resistance • Output current changes with vDSdue to channel length modulation. • Output resistance is given by • In the current mirror, vO = vDS2 Microelectronic Circuit Design McGraw-Hill Chap1-46

  47. Current Mirror Layout Two possible layouts of a current mirror Microelectronic Circuit Design McGraw-Hill Chap1-47

  48. Design of Multiple Current Mirrors: Example Choose R to set IREF= 25 mA Microelectronic Circuit Design McGraw-Hill Chap1-48

  49. Design of Multiple Current Mirrors (contd). and R can be replaced by transistor M6 for better integration. We know that VGS6 = -6.84 V and ID = 25 mA and M6 is in saturation Microelectronic Circuit Design McGraw-Hill Chap1-49

  50. MOS Transistor Scaling • Drain current: • Gate Capacitance: wheret is the circuit delay in a logic circuit. Microelectronic Circuit Design McGraw-Hill Chap1-50

More Related