1 / 12

O rganisasi dan arsitektur komputer

Pertemuan 13 : Micro-programmed Control. O rganisasi dan arsitektur komputer. Control Unit Organization. Micro-programmed Control. Menggunakan instruksi sequensial untuk kontrol operasi komplek Called micro-programming or firmware Panjang word pada program- mikro :

orli
Download Presentation

O rganisasi dan arsitektur komputer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pertemuan 13 : Micro-programmed Control Organisasi dan arsitektur komputer

  2. Control Unit Organization

  3. Micro-programmed Control • Menggunakaninstruksisequensialuntukkontroloperasikomplek • Called micro-programming or firmware Panjang word pada program-mikro : • Maximum number of simultaneous micro-operations supported • The way control information is represented or encoded • The way in which the next micro-instruction address is specified

  4. Micro-instruction Types • Each micro-instruction specifies single (or few) micro-operations to be performed • (vertical micro-programming) • Each micro-instruction specifies many different micro-operations to be performed in parallel • (horizontal micro-programming)

  5. Typical Microinstruction Formats

  6. Organization ofControl Memory

  7. Control Unit

  8. Control Unit Function • Sequence login unit issues read command • Word specified in control address register is read into control buffer register • Control buffer register contents generates control signals and next address information • Sequence login loads new address into control buffer register based on next address information from control buffer register and ALU flags

  9. Functioning of MicroprogrammedControl Unit

  10. Wilkes Control • 1951 • Matrix partially filled with diodes • During cycle, one row activated • Generates signals where diode present • First part of row generates control • Second generates address for next cycle

  11. Wilkes's MicroprogrammedControl Unit

  12. Address Generation

More Related