1 / 38

Wind Integration: Regulation, Imbalance, and Reliability

Michael Milligan Consultant National Renewable Energy Laboratory WAPA/LAP Technical Information Meeting for Regulation and Frequency Response Service March 18, 2004. Wind Integration: Regulation, Imbalance, and Reliability. Brief Outline. Time Scales Regulation

viola
Download Presentation

Wind Integration: Regulation, Imbalance, and Reliability

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Michael Milligan Consultant National Renewable Energy Laboratory WAPA/LAP Technical Information Meeting for Regulation and Frequency Response Service March 18, 2004 Wind Integration: Regulation, Imbalance, and Reliability

  2. Brief Outline • Time Scales • Regulation • Characteristics of good tariff • Load-following/Imbalance • Characteristics of good tariff • Capacity Value and Reliability • Summary of Operations Studies

  3. Time-frames: Power System Operations System Load 0 6 12 18 Days Time (Hour of the Day) Cycles Transient stability & short-circuit Seconds to minutes Regulation Minutes to hours Load Following Daily scheduling/unit commitment

  4. Characteristics of a Good Regulation Tariff • Recognize the actual, measured physical impact on system regulation requirements • Independent of business structure of generators • Recognize the statistical nature of regulation • Recognize the obligation to balance the system (CPS-1 and CPS-2), not individuals • Distinguish between entities • With small or large regulation impacts • Consumer or supplier of regulation • Impacts may differ thru time

  5. Characteristics of a Good Regulation Tariff • Must recognize physical system aggregation • Must track actual cost to control area (cost-causality) • Should not over-collect or subsidize • For a constrained system it is even more important to correctly measure the regulation impacts • The method should be testable for all these properties • The ORNL vector allocation meets all of these tests • Verified in before/after examination by BPA

  6. Imbalance Impacts • Load-following time scale • Should be measured in terms of the physical impact on system imbalance • Independent of business structure of generators • Why don’t we run another resource to compensate for wind’s deviations from forecast? • Because of the statistical independence of wind forecast errors and load forecast errors • System must be balanced, individuals do not

  7. Example

  8. Case: Wind forecast error makes imbalance significantly worse than no-wind case

  9. Case: Wind forecast error makes imbalance somewhat worse than no-wind case

  10. Case: Wind forecast error makes imbalance somewhat better than no-wind case

  11. Wind forecast errors could conceivably improve system imbalance to zero (unlikely but possible)

  12. Load-Following/Imbalance Tariffs • Does method differentiate between previous cases? • Wind plants that have no aggregate impact on system imbalance • Wind plants that have moderate impact (positive or negative) on system imbalance • Wind plants that have significant impact (positive or negative) on system imbalance • Given the stochastic nature of imbalances, all of the above are likely to occur during parts of the year – does the method account for this?

  13. Characteristics of a Good Imbalance Tariff • Recognize the actual, measured physical impact on system imbalance requirements • Independent of business structure • Recognize the statistical nature of imbalance • Recognize the obligation to balance the system (CPS-1 and CPS-2), not individuals • Distinguish between entities • With small or large imbalance impacts • Consumer or supplier of imbalances • Impacts may differ thru time

  14. Characteristics of a Good Imbalance Tariff • Must recognize physical system aggregation • Must track actual cost to control area (cost-causality) • Should not over-collect or subsidize • For a constrained system it is even more important to correctly measure the imbalance impacts • The method should be testable for all these properties

  15. Imbalance/Load Following • Load following examples • Impact of geographically disperse wind • System studies that evaluate imbalance, regulation, and some other system impacts

  16. Geographically Disperse Wind Development • Two projects: • Joint project with Minnesota Department of Public Service (Commerce) • Joint project with Iowa Wind Energy Institute

  17. One-Hour Delta Hourly Output

  18. Iowa One-Hour Delta Hourly Output

  19. Key Results: Geographically Disperse Wind Development • Minnesota study examined system reliability only • Best LOLP/EUE was achieved with geographically disperse development • Iowa study examined economic benefit and reliability in separate optimizations • Best LOLP/EUE was achieved with geographically disperse development • Best economic benefit was achieved with geographically disperse development

  20. Iowa Load Following Study • 8 wind scenarios • Wind capacity • 800 MW • 1,600 MW (22.7% of peak load) • Scenario 1 • 1,300 MW at one site • All other scenarios • Geographic spread based on optimal locations

  21. How Does Wind Affect 1-Hour Load Following?

  22. Variability of Load Following With/Without Wind

  23. Largest Single-hour Difference at 800 MW Penetration

  24. Largest Single-hour Difference at 1600 MW Penetration

  25. Load Following Allocated to Wind Difference due to geographic dispersion

  26. Imbalance Impact of Wind Increases with Penetration

  27. Iowa Load Following Conclusions • Geographically disperse wind causes an increase in the standard deviation of load following requirements of about 2.5% of rated capacity at 22.7% penetration rate with a backward-looking analysis • Geographically disperse wind causes an increase in the standard deviation of imbalances of about 4% of rated capacity with a simple wind forecast at 22.7% penetration rate and good load forecasting (lesser impacts for worse load forecasting) • Results will depend on wind regime, loads, and would be expected to differ in other situations

  28. Reliability Studies • Combined geographic benefits with reliability optimization (based on EUE/LOLP analysis) • Capacity value of wind = increase in load that can be supported holding EUE/LOLP constant

  29. Modeling Methods • Minnesota: Dynamic fuzzy search to maximize system reliability • Iowa: Dynamic fuzzy search to maximize two separate objective functions • Economic benefit • System reliability • Corroboration of the economic benefit results with a genetic algorithm

  30. Genetic Algorithm and Fuzzy Search Results: Economic Sites

  31. Tradeoff: Reliability vs. Economics

  32. Generic 100 MW Plant

  33. Capacity Credit Relative to Gas Reference Unit CA RPS Integration Study Results

  34. Example Integration Studies • Operational impact studies results • All use similar methods for evaluating regulation and load-following impacts • Load and wind treated stochastically • System is balanced

  35. Integration Study Results (UWIG)

  36. Utility Wind Interest Group • Interest in UWIG has surged as more utilities have evaluated/adopted wind • “Clearing house” for operational issues, solutions, etc. • www.uwig.org • Recommend WAPA become engaged with UWIG

  37. Proposed Next Steps • Joint study of integration impacts of wind on the WAPA/LAP system • Utilize actual wind power output data and load data from WAPA’s system • DOE/NREL/ORNL analytic support • Other stakeholders

More Related