1 / 27

Detectors at Synchrotron Sources now and in the future

Detectors at Synchrotron Sources now and in the future. The Detector Challenge:. Diffraction limit. ESRF (future). Synchrotron Sources. ESRF (2000). ESRF (1994). Second generation. First generation. X-ray tubes. 1900 1960 1980 2000. The Detector Challenge:.

gwidon
Download Presentation

Detectors at Synchrotron Sources now and in the future

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Detectors at Synchrotron Sources now and in the future Heinz Graafsma; ESRF-France

  2. The Detector Challenge: Diffraction limit ESRF (future) Synchrotron Sources ESRF (2000) ESRF (1994) Second generation First generation X-ray tubes 1900 1960 1980 2000 Heinz Graafsma; ESRF-France

  3. The Detector Challenge: ID19 Microtomography - Topography ID20 Magnetic scattering ID21 X-ray microscopy ID22 Microfluorescence ID24 Dispersive EXAFS ID26 Spectroscopy on ultra-dilute samples ID27 Industry ID28 Inelastic scattering ID29 Biology MAD ID30 High pressure ID32 Surface EXAFS - Photoemission BM5 Optics BM16 Powder diffraction BM29 Absorption spectroscopy ID1 Anomalous scattering ID2 Small-angle scattering ID3 Surface diffraction ID8 Spectroscopy using polarised soft X-rays ID9 Biology / High pressure ID10 Multipurpose ID11 Materials science ID12 Circular polarisation ID13 Microbeam ID14 Protein crystallography ID15 High energy ID16 Inelastic scattering ID17 Medical ID18 Nuclear scattering Heinz Graafsma; ESRF-France

  4. Situation now ADSC, California, USA Large area CCD systems, mainly for PX • Integrating detector • ==> noise & information loss • Indirect detection • ==> losses & spreading Heinz Graafsma; ESRF-France

  5. Situation now Visible light Visible light High resolution imaging with CCD’s Reflecting objective First mirror Simple concave surface Scintillator Eyepiece x2 Tube lens ESRF Frelon camera X-ray beam Intermediate image Beam stop Second mirror Small convex surface Scintillator is very inefficient Full tomo dataset in 10 sec. Heinz Graafsma; ESRF-France

  6. Situation now Window 20mm 0.8mm 10mm Anode wires 0.8 mm 0.5mm Copper tracks GRP PC Board Gas filled detectors, parallel readout Heinz Graafsma; ESRF-France

  7. Situation now FPGA Pulse Height X Fine PositionLook-Up Table ADC X Position 16 channels per board 8 boards Position X BTL Bus Coarse +/- 1 Timing Timing Histogramming Memory Hit Count X DPRAM Clock and Sync Generator X/Y Posn. Counter Hit Count Y DPRAM Y Position FPGA Pulse Height ADC Timing 16 channels per board 8 boards Position Y BTL Bus Y Fine PositionLook-Up Table Timing Coarse +/- 1 Gas filled detectors, parallel readout Heinz Graafsma; ESRF-France

  8. X-ray photon Detectors for now and the future Direct conversion of X-rays to electrical signal Si, GaAs, Cd(Zn)Te,… best spatial resolution ASICS with intelligent pixels, single photon processing: counting, energy coding. No noise, no information loss 3D connectix for 4-side buttable Heinz Graafsma; ESRF-France

  9. Really low noise: Heinz Graafsma; ESRF-France

  10. Problems to overcome: • Radiation tolerance • Charge sharing • Yield • 4 side-butting (3D connectivity) • High Z sensors (GaAs, CdZnTe) • This can all be overcome by enough critical mass  COLLABORATION! • Limited energy resolution Heinz Graafsma; ESRF-France

  11. Energy Resolving Detectors Silicon Drift Detectors: Heinz Graafsma; ESRF-France

  12. Energy Resolving Detectors Silicon Drift Detectors: • Advantages: • - energy resolution 130 eV • Fast: 100 kcps per pixel • 2D systems possible • Large drive by space research • Well adapted to 12 keV and lower. • Advanced technology • Canberra and MPI-Munich/Milan poly technique Heinz Graafsma; ESRF-France

  13. Fast Detectors:AVALANCHE PHOTODIODE Real device “Reach-Through” APD X-ray Beam Avalanche region Drift region Heinz Graafsma; ESRF-France

  14. AVALANCHE PHOTODIODE • Energy range : 3 keV < EX-ray < 30 keV (limited by thickness) • Counting rate: ~107 cps • Dark noise:~ 0.01 cps • Energy resolution: 20 % @ 24keV 39% @ 12keV • Time resolution:~ 1ns Heinz Graafsma; ESRF-France

  15. Head = APD + Pre-amplifier AVALANCHE PHOTODIODE • Hamamatsu • 5x3mm2 135 m available • =3mm 135m (proto) • EGG • 5x5mm2 110m • 10x10mm2 110 m Acquisition system : ACE (APD Controller Electronic) • Principle of use: amplitude (mV)  energy(eV) • 1 counter, 2 thresholds (high and low) for level discrimination • Counter with low level only = integral counter. • Counter with low-high level = counter in energy range. Acquisition system ACE (APD Controller Electronic) Heinz Graafsma; ESRF-France

  16. CCD 1 CCD 2 CCD 3 CCD 4 Voie 1 Voie 2 ROI ROI ROI ROI Voie 3 Voie 4 Fast parallel readout CCD’s Heinz Graafsma; ESRF-France

  17. Fast CCD-based Systems for Detection of X-rays and Electrons H. A. Padmore1, C. Bebek2, M. Church1, P. Denes3, J. Glossinger1, S. Holland2, H. von der Lippe3 and J. P. Walder3 Lawrence Berkeley National Laboratory 1 ALS, 2 Physics and 3 Engineering Divisions - CCDs for synchrotron radiation x-ray research - Development of optical CCDs at LBNL - Column Parallel CCDs - Status report Heinz Graafsma; ESRF-France

  18. Thick, deeply depleted, back illuminated CCDs and CMOS CCD readout used in SNAP 36 CCDs/ 36 HgCdTe Light from telescope Shutter Spectrograph + Electronics Front-End Electronics Heinz Graafsma; ESRF-France

  19. Prototype (almost) Column Parallel CCD Readout Structure N-CRIC 1 FPGA 51 channel aCP-CCD output - image correction - image compression 51 channel aCP-output N-CRIC 2 FPGA Heinz Graafsma; ESRF-France

  20. “New” developments summary • Pixel Detectors: Asics and sensors • Silicon Drift Detectors • Avalanche Photodiodes • Parallel readout CCD’s • Plus others: high resolution phosphors, flat panel imagers, diamond detectors, ... Heinz Graafsma; ESRF-France

  21. Characteristics of XFEL radiation • Photon energy X-rays: 3 up to 15 keV soft X.: 200 up to 2000 eV • Photon per pulse 1012 up to 1014 • Divergence <1 up to few 10 µrad • Source appearance ~ 100 µm (diffraction limited) • Bandwidth ~ 0.1 % • Pulse duration 100 – 300 fs (probably decreasing) • Repetition rate Macro-Bunch (MB): 10 – 120 Hz single bunch within MB: ~ 10MHz • Short pulse high energy radiation from spontaneous emission • Photon energy 100 – 400 keV • Photons per pulse ~108 / 0.1%bw Heinz Graafsma; ESRF-France

  22. Accelerator time pattern Heinz Graafsma; ESRF-France

  23. Time-resolved pump-probe experiments • Use X-rays and optical laser to pump/probe the investigated system. Both systems will be referenced timewise to the RF signal of the accelerator. • Laser-to-RF jitter • X-ray-to-RF jitter • Path length instabilities •  Time delay of Pump and Probe varies (~ ps) •  determines overall t adjustable delay pump beam sample probe beam RF detection systems A solution: Sample data at pump/probe frequency Heinz Graafsma; ESRF-France

  24. X-rays Detector Particle selection Single molecule diffraction • structure solution without phases by collecting slices in q-space, • accumulation of identical orientations, followed by crystallographic procedures • 3D structure solution by oversampling and reconstruction methods Heinz Graafsma; ESRF-France

  25. X-ray photon correlation spectroscopy x-ray pulse • Spatial correlations • Temporal correlations qy sample qx t= x-ray pulse sample t=0 x-ray beam splitter delay: ns – ps 1 ps = 300 µm precision 0.3µm = 1 fs From LCLS scientific case Heinz Graafsma; ESRF-France

  26. Summary of requirements • General • Single-photon counting detectors seem impossible • Energy resolution (10%) for background suppression • High quantum efficiency • Very low noise due to dark current • Homogenity and distortions must be minimized • Data acquisition • Enable readout/storage at repetition rate • Correlate with photon beam parameters and diagnostics • Software integrated into data acquisition system • Time related requirements • Fast readout  10 – 100 Hz • Noise due to readout must not exceed dark current Heinz Graafsma; ESRF-France

  27. Conclusion Detector developers will have a lot to do in the years to come Heinz Graafsma; ESRF-France

More Related